Results 1 to 4 of 4
  1. #1
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,415
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Real Boeing 737 yoke handle wiring

    Hi all,
    I have just wired my pair of real Boeing yokes and thought I would share the wiring code for anyone else who is going to install real yokes. The real Boeing wiring harness contains 14 wires, I found that two were redundant or spare.

    1 ELEVATOR TRIM ROCKER SWITCHES (Both switches must be operated together to work)
    Boeing wiring harness colors
    White/Red = Common
    White/Orange = Trim "Down"
    White/Black/Orange = Trim "Up"
    White/Violet = Makes with White/Red - both directions *Not used in my sim*

    2 PTT ROCKER SWITCH
    Boeing wiring harness colors
    White/Black/Brown = Common
    White/Grey = Intercom (Bottom trigger)
    White/Red/Black = Mic (Top trigger)

    3 AUTOPILOT DISENGAGE PUSH BUTTON (This button has 3 pairs of contacts)
    Boeing wiring harness colors
    Pair 1 - White/Blue + White/Black/Yellow = A/P Disengage (Normally OPEN switch)
    Pair 2 - White/Yellow + White/Green = Normally CLOSED switch *Not assigned in my sim*
    Pair 3 - White/Black/Green + White/Brown = Normally CLOSED switch *Not assigned in my sim*

    Cheers, Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  2. Likes golfromeo516 liked this post
  3. #2
    10+ Posting Member



    Join Date
    Sep 2012
    Location
    Netherlands-South
    Posts
    24
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Real Boeing 737 yoke handle wiring

    Hello Gwyn, This is highly appreciated. I was just about to start on this task for my own yokes and saw this! Thank you very much. Best Regards, Marc

  4. Likes Westozy liked this post
  5. #3
    25+ Posting Member



    Join Date
    Oct 2011
    Location
    NSW Central Coast AUS
    Posts
    33
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Real Boeing 737 yoke handle wiring

    Gwyn
    I agree, very handy post indeed.
    Thank you
    Tony

  6. #4
    25+ Posting Member
    Join Date
    Jul 2012
    Location
    Florida, USA
    Posts
    25
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Real Boeing 737 yoke handle wiring

    This is great info and will help me too. Perhaps the other two pins are for the light in the trip number reminder (if that's what it's called)?

    Thanks!

    ...Dave

    Dave Jones
    Fort McCoy, Florida USA