Com radio

[asessa]

Hi JL, i'm trying to setup RMP .. but your documentation don't say how i can do it because i think is obsolate .
Can you tell me how do i have to for setup this modules?
I've this this FMGSServer.iocp.ini file

[IOCP_VARs]
IP=localhost
Port=8099
USBKeys=-1
USBKeysfo=-1
RMP1MHzVar=-1
RMP1kHzVar=-1
RMP2MHzVar=-1
RMP2kHzVar=-1
RMP3MHzVar=-1
RMP3kHzVar=-1
RMP1Act_disp=-1
RMP1Stby_disp=-1
RMP2Act_disp=-1
RMP2Stby_disp=-1
RMP3Act_disp=-1
RMP3Stby_disp=-1
RMP1Act_dec=-1
RMP1Stby_dec=-1
RMP2Act_dec=-1
RMP2Stby_dec=-1
RMP3Act_dec=-1
RMP3Stby_dec=-1
RMP1SWAP_SW=-1
RMP2SWAP_SW=-1
RMP3SWAP_SW=-1
RMP1ON_SW=-1
RMP2ON_SW=-1
RMP3ON_SW=-1
RMP1VHF1_SW=-1
RMP1VHF1_LED=-1
RMP1VHF2_SW=-1
RMP1VHF2_LED=-1
RMP1VHF3_SW=-1
RMP1VHF3_LED=-1
RMP2VHF1_SW=-1
RMP2VHF1_LED=-1
RMP2VHF2_SW=-1
RMP2VHF2_LED=-1
RMP2VHF3_SW=-1
RMP2VHF3_LED=-1
RMP3VHF1_SW=-1
RMP3VHF1_LED=-1
RMP3VHF2_SW=-1
RMP3VHF2_LED=-1
RMP3VHF3_SW=-1
RMP3VHF3_LED=-1
.

[jeehell]

Hi,

the documentation does not clearly say how to setup the radio modules, but the process is more or less the same: once the card is recognized as an extra mastercard, you have to put the correct input/output numbes and the correct device index.

Pay attention to the fact you need to declare the radio module in sioc.ini. It should be a line such as that:
MASTER=1,8,1,0

this may need to be slightly different for your needs, depending on the number of hardware you already have from opencockpit. Please read their own documentation on sioc.ini setup.

Regards,
JL

[asessa]

Hi

all the modules listed should be compatible.
However, I do NOT recommend FDS ones. They are nor worth the money (only one VHF canal, all switches are dummies).
Cockpitsonic drivers are in dev' right now so not public, but looking for testers.

Regards
JL

Hey JL, can you give me drivers for test the radio ?