A320 FMGS Compatible with Cockpitsonic FCU/EFIS/AUTOBRAKES/ RADIO.......

[Jerec]

Hi JL,

just came back vom lunchbreak, where i could do a further testflight. At the landing same problem: No reaction on thrustlever to idle and log says:

HardwareConnect Launched
ComplexJoy.dll loaded
EHIDmodule.dll loaded
FSUIPCmodule.dll loaded
EHID:Connected version5
Fast Timer failed

Must be short after TO, because the logfiles date is 13.40. Dont know, if you can read any errors out of this log, the error is only Fast timer failed.

Regards Henrik

[jeehell]

Hi Henrik

Ok this is strange.
I will try to add more logging features.
Can you also try without ComplexJoy and FSUIPC module meanwhile?

Regards,
JL

[Jerec]

Good morning,

testing without FSUIPC and complexjoy would be very difficult due to thrustcontrol via complexjoy and without FSUIPC flying will be impossible, right?
Later this morning i will be at home and install the new version of FMGS with new navdata and maybe the situation might be better. When you create a deeper logging function, i will test it at once.

Regards Henrik

[jeehell]

Hi Henrik,

FSUIPC module is not needed at all, it is there only if you need to map some hardware through FSUIPC (for example, using an IO board that does not have a direct interface to my software, but only to FSUIPC). That's why it is optionnal at installation.

Regards,
JL

[Jerec]

Hi JL,

ok got it, then i can disable FSUIPC feature at this time and for the future, because my whole cockpit will be from Skalarki. Complexjoy i can disable too, just there will be no reversers, but this will no matter. Then only EHID will be active.
In the lunchbreak i installed the new beta on main PC and after finishing work for today, i will continue with other PCs as well. So this evening i can afford new testing data.

Regards Henrik

[Jerec]

Hi JL,

so after testing the new beta i´ve got a log, that could help for troubleshooting:

HardwareConnect Launched
ComplexJoy.dll loaded
EHIDmodule.dll loaded
SkalarkiIO.dll loaded
SkalarkiIO.dll:Starting server at (null):25253...
SkalarkiIO.dll:Waiting for client...
EHID:Connected version5
SkalarkiIO.dll:Client connected: 127.0.0.1:50509
SkalarkiIO.dll:Waiting for client...
SkalarkiIO.dll:Client connected: 127.0.0.1:50510
SkalarkiIO.dll:Waiting for client...
SkalarkiIO.dll:Client disconnected: 127.0.0.1:50510
SkalarkiIO.dll:Client connected: 127.0.0.1:50511
SkalarkiIO.dll:Waiting for client...
Fmap timer failed
EHID:analog input failed. objID:50505401 Value:2000
EHID:analog input failed. objID:50505401 Value:1FF0
EHID:analog input failed. objID:50705301 Value:3B90
Fmap timer failed
EHID:analog input failed. objID:50705403 Value:20E0
EHID:analog input failed. objID:50505402 Value:2040
EHID:analog input failed. objID:50705403 Value:20D0
EHID:analog input failed. objID:50505401 Value:2010
EHID:analog input failed. objID:50505401 Value:2010
EHID:analog input failed. objID:50705301 Value:3BA0
EHID:analog input failed. objID:50505401 Value:2010
EHID:analog input failed. objID:50705403 Value:20E0
EHID:analog input failed. objID:50705403 Value:20E0
EHID:analog input failed. objID:50505401 Value:2030
EHID:analog input failed. objID:50505401 Value:2010
EHID:analog input failed. objID:50705301 Value:3B90
EHID:analog input failed. objID:50505402 Value:2030

The crash is surely caused by the EHID, as far as i can see.

Regards Henrik

[jeehell]

Hi,

I haven't forgotten you...
Please try those:
http://www.jeehell.org/HardwareConnect.exe
http://www.jeehell.org/EHIDmodule.dll
Again post your logs when you encounter issues.

I think it is not impossible the crash is caused by skalarki module. His module could corrupt the main hardware connect memory, and thus cause other bugs. Can you really not try a single manual flight without his module? It also looks it is not connected to anything anyway?

Regards,
JL

[Jerec]

Hi JL,

Thx for the Update. In the lunchbreak i installed them and checked it. After a while a got an error as known. When i come home, i will uncheck SkalarkiIO and test only with EHID. I need it only for the hardware of Marcin, but flying without it is also possible. I only thought, that FSUIPC and complexjoy must be on, but i can fly without it (only no reversers). Maybe thereafter we will see, if the problem still exists.

I know its a little OT, but i am right, that i have to load all modules, also, if a have Hardware for it (like FCU and EFIS)? At this time, i load all modules.

Regards Henrik

[jeehell]

Hi,

the FCU and EFIS software modules are not required if you use hardware instead. The OVHD though is required, even if you drive all your OVHD panel through hardware.

JL

[asessa]

Hi,

the FCU and EFIS software modules are not required if you use hardware instead. The OVHD though is required, even if you drive all your OVHD panel through hardware.

JL

Wow, i didn't know this .... i always open FCU and EFIS panels :P