WIRING QUESTION

[Fasouli]

It is the same thickness and is multistrand - so yes

Thanks for the help . But i have ONLY 1 more question left (please bear with me) lol. I know that for every input a wire or more goes to the interface card and One wire is connected to 9 inputs which is ground .so my question is how will i solder the same wire to connect 9 ground pins on the switches to only one ground pin on the master card
thanks

[tiburon]

You connect the ground pin of the first switch to the ground pin of the second switch to the ground pin of the third switch etc.
Then you connect the 9th ground pin also to the OC ground, so only one connection for nine switches.
Hope this helps.

[Fasouli]

You connect the ground pin of the first switch to the ground pin of the second switch to the ground pin of the third switch etc.
Then you connect the 9th ground pin also to the OC ground, so only one connection for nine switches.
Hope this helps.

Yes i know that but i mean that if im using only one wire for the ground connection how can i solder it multiple times on multiple pins . because a wire only has two sides
Thanks

[fordgt40]

On all the intermediary connections you attach (by bending around or passing through the terminal hole) the incoming wire and outgoing wire at the switch terminal. Then you solder this connection to make it permanent.