Results 11 to 20 of 105
-
04-13-2013, 01:44 PM #11
- Join Date
- Jul 2013
- Posts
- 917
Re: Help Please MCP Not recognized sioc
Are you using a USB hub, if so, is it powered?.
Have you tried using different USB ports on the main computer?
Also, suggest you post your sioc.ini file
-
04-13-2013, 02:32 PM #12
- Join Date
- Mar 2013
- Location
- Adelaide, South Australia
- Posts
- 115
Re: Help Please MCP Not recognized sioc
Yes I am using a USB port and It is powered
Here is my sioc.ini
[ fichero de configuracion para el SIOC ver. 4.2 ]
[ Configuration file for SIOC ]
[************** SIOC ***************]
[ Nombre asignado al SIOC ]
[ SIOC name ]
Name=Main
[ Puerto del servidor IOCP ]
[ IOCP port ]
IOCP_port=8092
[ Tiempo de respuesta mلximo de los paquetes IOCP ]
[ IOCP Timeout ]
IOCP_timeout=4000
[ Arranque minimizado en la barra ]
[ Start minimized in tray ]
Minimized=No
[ Retraso necesario para las variables toggles (Project Magenta)]
[ Deley needed for var. toggles (Project Magenta) ]
toggle_delay=20
[ Fichero de configuracion ]
[ Configuration File ]
CONFIG_FILE=.\sioc.ssi
[************** MONITOR MODULE ***************]
[ Desabilitar monitorizacion remota del SIOC ]
[ Remote monitor disable mode yes/no ]
Monitor_disable=No
[ Refresco broadcast monitor (en segundos) ]
[ Broadcast monitor time (seconds) ]
Monitor_time=2
[************** IOCARDS MODULE ***************]
[ Desactivar el mَdulo de las IOCards ]
[ Disable IOCards module ]
IOCard_disable=No
[ Divisor de frecuencia para los ejes analogicos (1-999). Retarda la entrega de valores. ]
[ Frequency divisor for delay the analogic axes. (1-999)]
Divisor_AD=10
[------------- CARDS CONFIG -------------]
[ IOCard Master ]
[...............]
[ Spanish : ]
[ MASTER=(Indice device),(Tipo),(Nْmero de tarjetas),(Nْmero device) ]
[ Indice Device: حndice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sَlo haya una tarjeta y no se tenga en cuenta el nْmero de device, por defecto un script en SIOC cuando no se pone parلmetro DEVICE, se hace referencia al يndice 0]
[ tipo = 0 : Emulador de Master Card // OBSOLETO ]
[ tipo = 1 : Tarjeta Master conectada al puerto paralelo directamente // OBSOLETO ]
[ tipo = 2 : Tarjeta Master conectada al puerto paralelo mediante cable de compatibilidad // OBSOLETO ]
[ tipo = 3 : Placa de expansiَn por puerto paralelo // OBSOLETO ]
[ tipo = 4 : Tarjeta USBExpansion usada ]
[ tipo = 5 : Modulo MCP de Opencockpits ]
[ tipo = 6 : Tarjeta USBOutputs ]
[ tipo = 7 : Modulo EFIS de Opencockpits ]
[ tipo = 8 : Modulo Radio COM de Opencockpits ]
[ tipo = 9 : Modulo Radio NAV de Opencockpits ]
[ tipo = 10 : Modulo Radio ADF de Opencockpits ]
[ tipo = 11 : Modulo Radio ATC de Opencockpits ]
[ tipo = 12 : Modulo Radio Airbus RMP de Opencockpits ]
[ tipo = 13 : Modulo FMC-737 de Opencockpits ]
[ tipo = 14 : Tarjeta USBDcmotorPLUS ]
[ Nْmero de tarjetas = Nْmero de placas Master usadas, 1 a 4 para uso de placas de expansiَn, 1 para conexiَn de placa Master directa o del Emulador ]
[ Nْmero de device = 0 en el caso del Emulador o primera tarjeta USB detectada, Direcciَn del puerto paralelo (por ejemplo $037, o nْmero de dispositivo USB ]
[ Un ejemplo de 2 USBExpansion conectadas con 3 y 2 placas Master ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]
[ Un ejemplo de conexiَn a simulador ]
[ MASTER=0,0,1,0 ]
[ English : ]
[ MASTER=(Device index),(Type),(Number of cards),(Device number) ]
[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]
[ type = 0 : Master Card Emulator // OBSOLETE ]
[ type = 1 : Master Card connected directly to parallel port // OBSOLETE ]
[ type = 2 : Master Card connected throught compatibility cable to parallel port //OBSOLETE]
[ type = 3 : Expansion Card connected throught parallel port //OBSOLETE ]
[ type = 4 : USBExpansion Card used ]
[ type = 5 : Opencockpits MCP module ]
[ type = 6 : USBOutputs Card used ]
[ type = 7 : EFIS module ]
[ type = 8 : Radio COM module ]
[ type = 9 : Radio NAV module ]
[ type = 10 : Radio ADF module ]
[ type = 11 : Radio ATC module ]
[ type = 12 : Radio RMP Airbus module ]
[ type = 13 : FMC-737 module ]
[ type = 14 : USBDCmotorPLUS Card used ]
[ Number of Cards = Master cards connecteds, 1 to 4 for expansion cards, 1 for a Master card directly connected or Emulator ]
[ Number of device = 0 for Emulator or first USB card detected, parallel port address, device number for specifies USBexpansion card ]
[ For example, two USBExpansion cards connected with 3 and 2 Master cards used ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]
[ For example, use of Master card emulator ]
[ MASTER=0,0,1,0 ]
[ Use the first USBExpansion card connected with only one Master Card attached ]
[ Esta definiciَn es para usar la primera tarjeta USBExpansion que se encuentre instalada que ademلs llevarل conectada una placa Master ]
[MASTER=3,6,1,252]
[MASTER=0,4,1,0]
[MASTER=0,12,1,0]
[MASTER=0,5,1,0]
[ Others Cards / Otras tarjetas ]
[...............................]
[ Spanish : ]
[ Nombre_de_tarjeta=(Indice device),(Nْmero device) ]
[ Indice Device: حndice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sَlo haya una tarjeta y no se tenga en cuenta el nْmero de device, por defecto un script en SIOC cuando no se pone parلmetro DEVICE, se hace referencia al يndice 0]
[ Nْmero de device = 0 para usar primera tarjeta USB de este tipo detectada َ nْmero de dispositivo USB ]
[ English : ]
[ Name_of_card=(Device index),(Device number) ]
[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]
[ Number of device = 0 for first USB card of this type detected, or device number for a specifies device ]
[ Ejemplo de dos USBServos en indices 0 y 1, y nْmeros de devices 17 y 23 ]
[ Example of two USBServos for index 0 and 1, and device number 17 and 23 ]
[ USBServos=0,17 ]
[ USBServos=1,23 ]
USBStepper=0,0
USBKeys=0,0
USBServos=0,0
USBRelays=0,0
USBDCmotor=0,0
[ Para los ejes analَgicos se usan los nْmeros de devices de las tarjetas donde estلn alojados ]
[ For analogic axles, you use the device number of cards what allow the axles ]
USBAnalogic=0,0
[************** FSUIPC MODULE ***************]
[ Desabilitar lectura de las FSUIPC ]
[ FSUIPC disable mode yes/no ]
FSUipcdisable=No
[ Refresco recepciَn FSUIPC ]
[ FSUIPC refresh ]
FSUipcRefresh=50
[************** IOCP CLIENTS MODULES ***************]
[ Retraso para inicializacion una vez conectado el cliente en milisegundos ]
[ Delay for initialization when client has been connected in mseconds ]
IOCPini_delay=3000
[************** IOCP CLIENT MODULE #0 ***************]
[ Desactivar el mَdulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient0_disable=No
[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient0_host=localhost
[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient0_port=8099
[************** IOCP CLIENT MODULE #1 ***************]
[ Desactivar el mَdulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient1_disable=Yes
[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient1_host=localhost
[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient1_port=8099
[************** SOUND MODULE ***************]
[ Ficheros de sonido ]
[ Sound Files ]
[ Desactivar el mَdulo de sonido ]
[ Disable Sound module ]
Sound_disable=yes
[ Volumen general de los sonidos 0-100 ]
[ Master Volume 0-100 ]
Volume=100
[ put '*' first filename for loop Sound ]
[ anteponer '*' en el fichero para bucle continuo de sonido]
[ Sound=wav_file,frequency,volume,pan ]
[ frequency=100 to 100000 0=original -1=current ]
[ volume=0 to 100, -1=current ]
[ pan=-100 (left) to +100 (right) 0=center -1=current ]
[ Sound=Fichero_wav,frecuencia,volumen,balance ]
[ frecuencia=100 hasta 100000 0=original -1=Por defecto ]
[ volumen=0 hasta 100 -1=Volumen por defecto ]
[ balance=-100 (Izquierda) hasta +100 (Derecha) 0=centro -1=Por defecto ]
[ #1 ]
Sound=APDis.wav,-1,-1,-1
[ #2 ]
Sound=*outermk.wav,-1,-1,-1
[ #3 ]
Sound=*hello.wav
[************** KEYBOARD EMULATOR MODULE ***************]
[ Nombre exacto de la ventana donde se enviarلn las teclas ]
[ Name of window for key send ]
[window = "Project Magenta Glass Cockpit - Build 396" ]
window =a.txt - Bloc de notas
[ Asignaciَn de teclas ]
[ assign youe keys ]
#1=A
#2=B
#3=C
#4=D
#5=E
#6=F
#7=G
#8=H
#9=I
#10=J
#11=K
#12=L
#13=M
#14=N
#15=O
#16=P
#17=Q
#18=R
#19=S
#20=T
#21=U
#22=V
#23=W
#24=X
#25=Y
#26=Z
#27=1
#28=2
#29=3
#30=4
#31=5
#32=6
#33=7
#34=8
#35=9
#36=0
#37=<
#38=,
#39=.
#40=-
#41=*
#42=+
#43=//
#44=/0
#45=/1
#46=/A
#47=
#48=
#49=
#50=
#51=
#52=
#53=
#54=
#55=
#56=
#57=
#58=
#59=
#60=
#61=
#62=
#63=
#64=
#65=
#66=
#67=
#68=
#69=
#70=
#71=
#72=
#73=
#74=
#75=
#76=
#77=
#78=
#79=
#80=
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88= #200=
[ End of File ]
-
04-13-2013, 04:37 PM #13
- Join Date
- Nov 2010
- Location
- Copenhagen
- Posts
- 80
Re: Help Please MCP Not recognized sioc
The MCP should be defined in this ini file accoring to the device id and type.
But if your computer wont find the MCP trough the USB if will nerver work. You will have to get the computer to fnd the MCP first, then it will get an ID number in te SIOC window, and you can continue to config this in file.
If your computer wont find it, try to connect it to anoter one and see if windows reqonize it.
Another try could be to unplug all USB devices and start with the MCP
-
04-13-2013, 04:48 PM #14
- Join Date
- Jul 2013
- Posts
- 917
Re: Help Please MCP Not recognized sioc
Try plugging the USB cable into the main PC and not the hub - some USB Hubs are poor. As Claus suggests, when the MCP is recognised, you then need to define the device in the .ini file, but first things first
-
04-14-2013, 04:56 AM #15
- Join Date
- Mar 2013
- Location
- Adelaide, South Australia
- Posts
- 115
Re: Help Please MCP Not recognized sioc
Hi yes I am plugging it into the main PC and it does not work on other computers either, error code 43!
-
04-14-2013, 05:57 AM #16
- Join Date
- Jul 2013
- Posts
- 917
Re: Help Please MCP Not recognized sioc
When you say that it does not work on other computers, I assume that you are not using a hub and that you are plugging it in directly into a different pc`s main USB port. If so, are you sure that the power supply is working properly and giving out 5 volts?
I assume that this is a brand new MCP, if so, then perhaps you should raise this directly with Opencockpits
-
04-14-2013, 06:04 AM #17
- Join Date
- Mar 2013
- Location
- Adelaide, South Australia
- Posts
- 115
Re: Help Please MCP Not recognized sioc
yes i am using the correct voltage supplied by opencockpits because even when i dont have it plugged in the port some of the leds come on and opencockpits are not replying to my email
-
04-15-2013, 01:09 AM #18
Re: Help Please MCP Not recognized sioc
Hi, are you using Windows 7 ? If so you have a known problem. Try running the next microsoft tool : http://go.microsoft.com/?linkid=9740816
If that doesn't work, download one of the following and run :
for x86 systems : Download Update for Windows 7 (KB976972) from Official Microsoft Download Center
for x64 systems : Download Update for Windows 7 for x64-based Systems (KB976972) from Official Microsoft Download Center
The last two updates require validation.
-
04-15-2013, 08:30 AM #19
- Join Date
- Mar 2013
- Location
- Adelaide, South Australia
- Posts
- 115
Re: Help Please MCP Not recognized sioc
The update says "update is not applicable with this computer" And I am using the correct update, I know I have windows 7 and 64bit
WHAT AM I DOING WRONG?!!!!!
-
04-15-2013, 08:46 AM #20
Re: Help Please MCP Not recognized sioc
Nothing, it's just another MS quirk.
Try the next link : Windows Modules Installer - Error 1450 Insufficient System Resources
Candid connections: Platform for casual relationships Live Women Prime Сasual Dating
Super Сasual Dating - Genuine...