Results 1 to 3 of 3
  1. #1
    25+ Posting Member
    Join Date
    Nov 2012
    Location
    Argentina
    Posts
    42
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Llittle problem with Link2fs_Arduino_Keys_beta3

    Hi Jim, first of all thanks for this amazing software, now I just started with it today and found my first problem.
    I connected a simple on/off switch to the arduino mega board, then linked it to a keystroke, it works but only with one position.
    IE: The switch is linked to the landing lights, when I move it to ON lights turn on (so far everything ok), but now i move the switch to OFF and nothing happens, when I move the switch again to ON the lights turn off. Basically it's like if it needs and extra "tic" to complete the task.
    Any idea what I can be doing wrong?

    Thanks in advance for any input.

  2. #2
    500+ This must be a daytime job Jim NZ's Avatar
    Join Date
    Dec 2005
    Location
    New Zealand
    Posts
    764
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Llittle problem with Link2fs_Arduino_Keys_beta3

    I presume you are using a toggle switch so what you need to do is program the "On open" for the second action.

    When you push the toggle switch down ,, lets call that "On close" and to make it do something when you push the switch UP you need to program that with "On Open"

    Have a look at the check box in the "keys" programming section which is just above the "pin Number" box.

    Jim
    www.jimspage.co.nz/intro.htm
    All this and Liz still loves me ! !

  3. Thanks JMorrison thanked for this post
  4. #3
    25+ Posting Member
    Join Date
    Nov 2012
    Location
    Argentina
    Posts
    42
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Llittle problem with Link2fs_Arduino_Keys_beta3

    Got it thank you, will try it next time.
    BTW, can a single arduino board work with this and your other software (the one who can manage leds and stuff) at the same time?