Random Pics Of My GA Build

[kermit]

Hi Louie , I have one question,
Does the nav/gps switch has a momentary switch?
I can switch to nav , but as soon as I let go it returns to gps.
if I toggle on screen I can set it to nav permantly .
regards Henk

[Louie Mendez]

Use the GPS/NAV switch as the CDI button on your RXP GNS.

[AK Mongo]

Henk,

if you are using Fsuipcc there is an offset for toggle nav/GPS I believe.

Reid

[kermit]

Hi Reid,
i think I found it , but its just nav =1 and gps =0
therefore the selection is momentary push in will alter the gps into nav,
but as soon as I let go it will change to the old value,
but if I push the button on the screen it will stay on the new value
greetz

[AK Mongo]

http://www.mycockpit.org/forums/gene...av-switch.html

this thread talks about the switch toggling between them.

[Louie Mendez]

I use offset 3340(virtual buttons) and on fsuipc you can either mouse trap the NAV/GPS switch or assign as key press for CDI button.

[kermit]

Hi, found out the Simkits multicontroller isn`t that multi,
they have a fixed number of fixed fsuipc off sets.
So I gave my creditcard a push and bought me an oc mastercard and a usb card,
Now i have to figure out what ,who and where
greetz

[Louie Mendez]

welcome to the OC club! Don't worry Henk, I have the SIOC script and I'll give you a hand on this.

[Louie Mendez]

Knob for encoder with D-shaft.

[Louie Mendez]

I made the final decision not use metal enclosure, instead I will be using this plastic frame that will hold the whole assembly together.