PhidgetTextLCD 20X2 with fs2phidget for IRS panel (ifly737)

[airyadh]

Hi alan the problem is solved for the fs2phidget.chm, the problem was that i have only install the fs2phidget 4.3.66 ( this exe is just an update), i have download now the 4.3.65 version and installv it and now i have the fs2phidget.chm ready on the help window

[airyadh]

Hi Alan i have a last question in the fs variables manage what would the size (Bytes) ?

[oal331]

Insert this to your FsVarible xx.ini file

[IRS-text]
Offset=66C0
Length=20
FSType=Text
LoValue=
HiValue=
Format=#
Multiplier=1
Divisor=1
Integer=False
WriteOnly=False
LogicVar=False
FunctionVar=False
NormalizeAngle=False
IRS=False
Enable=

and this to your card's ini file

[Output 0]
File=IFLY737.ini
FSID=IRS-text
Enabled=True
ToggleFSID=
Invert=False
Rate=False
SingleStep=False
Step=1
Style=Text
Pointer=173
Format=#
Column=1
Backlit=True
OffSound=
OnSound=

To make it work,

1) first run ifly and iflytofsuipc tool
1) run fs2phidgets

About problems with your Fs2Phidgets installatin, you have first to install from here http://www.mycockpit.org/forums/down...p?do=cat&id=20 4.3.65 then update 4.3.66 and then the one i sent you by email



Good luck !!

Eddie

[airyadh]

Many thanks Eddie

[airyadh]

Hello, after setting, my phidget lcdtext 8/8/8,the informations are not display correctely ??
HDG/STS
PPOS
TK/GS
WIND
As you show, no dot and degrees on the PPOS, the wind is not set correctely, and also the TK/GS, the HDG/STS??
What the solution

Thanks

[CocnutAir]

Are those HDG/STS...WIND values all coming from the same offset?
Guessing they are, and are the result of the IRS display selector.
Are these values coming from iFly?
If so, you need to take this up on the iFly forum.

Regards,
Alan

[airyadh]

Hi Alan, yes all the values comes from the same offset "66C0" with lentgh "20", it's not comes from Ifly variables this is the link here on mycockpit website:http://www.mycockpit.org/forums/phid...irs-panel.html,there are an app called "iflyIRS" from FSPS website that drive the offset to display the "IRS display".
This the setting to do in Fs2phidget:
Insert this to your FsVarible xx.ini file

[IRS-text]
Offset=66C0
Length=20
FSType=Text
LoValue=
HiValue=
Format=#
Multiplier=1
Divisor=1
Integer=False
WriteOnly=False
LogicVar=False
FunctionVar=False
NormalizeAngle=False
IRS=False
Enable=

and this to your card's ini file

[Output 0]
File=IFLY737.ini
FSID=IRS-text
Enabled=True
ToggleFSID=
Invert=False
Rate=False
SingleStep=False
Step=1
Style=Text
Pointer=173
Format=#
Column=1
Backlit=True
OffSound=
OnSound=

We can say that the PPOS and HDG/STS is correct (only missing "dot" and "degrees", but the problem is with the TK/GS and WIND, for example for the WIND diplay the correct displaying is: 002.2 on the left and 0.0 on the right same for TK/GS, as you show the right text is displaying near the left text, on the link that i give OAL331 has found a solution i contact him but no answer

Regards
Ryadh

[CocnutAir]

I have NO control over what vendors place in a given offset.
You need to contact vendor and get correct values placed in the 20 bytes at offset 66C0.
66C0 is a memory location in your PC that a product like iFly populates.
FSUIPC reads that value and passes on to Fs2Phidget which displays the value on the TextLCD "as is".
If I could change iFly or iFlyIRS product to provide corrrect values I would help you.

[airyadh]

Ok Alan many thanks

Regard
Ryadh