05-17-2012, 05:18 AM #1
Poldragonet Overhead Annunciators Problem
I just received the Poldragonet OVHD Kit but I am struggling with the Annunciators...
How am I supposed to isolate them from the backlighting? Some fit into those nice holes (or square countersinks) that are completely painted and only have one (or two) small holes for the LED(s) but some (especially, but not only on the "white" panels") have completely transparent countersinks with the hole for the LED in it... Should I remove the panels and paint the countersinks or is there a "trick" to it?
BTW: If you buy sthg from Poldragonet you get excellent (24-7) support from Jakub! Way different then some experiences I read about on this forum.. Maybe it's just because I bought one of the "big" products... who knows."It is LEGEN... wait for it.... DARY" ARCOM_by_Marc
05-23-2012, 06:32 AM #2
- Join Date
- Nov 2008
- Shropshire England
Re: Poldragonet Overhead Annunciators Problem
I bought the MIP set from Poldragon. As with my KIT, you will probably find that you have to use a little glue here and a little paint there, but it will come together in the end. For the money, its not bad stuff, you just have to "make do" a little bit, thats all.
Go ahead, if it solves the problem, use a little paint.