FS Panel Studio Multiple Monitor Setup

[PH-JKL]

Hi Matti,

I'm building a Beech Baron 58, with 2 monitors for instruments and radio, GPS and engine instruments and a TH2G for outside view.

I used a 1024x720 size and resize it once undocked in FS9.
I placed a cardboard mask over the monitors to guide me placing the gauges.

Save your flight in FS9 and set it for 'deafault flight', the next time you start-up it should be at the same place.

Greetings.

[Matti V]

Thanks, now gauges open to monitor good alltime same place
but one proplem yet, how size ?
what size have real cessna and how can adding all gauges little 17" monitor have good real panel at simu?

and were i found photo pictures HDG and other knops good guality ? all panel picture i try print out to paper no have good guality text
next i adding rotary encoders to panel cover then have monitor gauges ready and good size.
19012014504.jpg
new yoke come later i make thats now ovn yoke.chy produckt no have good. and no found ewerytime start fs9 all setting right ?
fs9 joystick disablet and i use fsuip setting, but no have setting right ewerytime then open fs9

[PH-JKL]

Nice set up so far!

I don't know the size of the real gauges, but I made my own gauges a little smaller then the real thing so they fit on my screen.
Do you mean that you can't find the settings for your yoke in FSUIPC, or doesn't it work at all?

[Matti V]

I mean ch produkt yoke lose all setting sometime, and if setting have ok, ch no working good, plastic tube sticky, mean no move alltime good, no fly right, left/right move no have same alltime, many, i made ovn yoke now, hope have better. move good and good guality potentiometer.
i have be disappointed ch produckt yoke guality lot no working REAL feel and good newer



fsuip found setting but no alltime keep setting too right.
i has disabled fs9 joystick and use only fsuip,have better but no keep setting alltime too, fs9 setting same no keep setting ?
now yesteday fly has flaps setting lose up has down and down has down sometime but up sometime ???
flaps have in bu0368 leo bodnar card and working good longtime,now no ???

[PH-JKL]

Have you tried to remove all setting is fs9? Go to settings menu in FS9 and disable all joystick and button settings in FS. Sometimes FSUIPC drops your yoke because of that.
I used to have a CH product yoke and know what you mean, I use a Pro flight yoke from saitek now and it works fine in FS9 with FSUIPC.

[Matti V]

ok,thanks lot all peoples.
i must try setting make new someday then have time next fly.

can fsuip make trimm wheels whit encoder or have only potentiometer trimm ?
i think i have 10 rotary encoder and think make some at trimm wheel too . but no sure have fsuip setting thats ?
i think made servo or steppermotor feedback later at to trimm.same whit yoke made feedback but think how. maybe arduino link2fs can made. must read more and learn how.
but thats later future, first need made gauge panel full ready whit encoder.

leo bodnar card have many empty place yet need think what adding there

switches have all and trimm wheel and flaps now
strottle have saitek and working anytime good.

THanks lot all who help me
Have anybody ready code to arduino link2fs radio panel, and what 7-segment 8 digit use?
someday future want made radio too. many think and want, thats is fly sim hobby alltime need more
com1+2,nav1+2,ap, etc,etc and make lot itself if can. thats good hobby

but next week made yoke drive wheel at plywood ready. tube and box have ready and need wheel.
i adding cheap ebay linear bearing and linear rail to box F/B and tube 1" have big 6205 bearing L/R.

[PH-JKL]

Hi Matti

You can use a 10 rev potmeter, just hook up the outer two wires to 'ground' and '5V' and put the middle one on 'X', 'Y' or whaterver axis is free on your Bodnar card.
Programming is easy in FSUIPC, as you can set it as trim wheel.

[Matti V]

thanks, i must6 orden somewere 2-3 pot
now have normal potmeter and working ok,but maybe no best. use you 10K or 100K ? wich have better ?

[PH-JKL]

I use a 10K, but I don't know the difference between a 10 or 100K, maybe someone else can tell it.