Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: B737 Gear lever

  1. #1
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,415
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    B737 Gear lever

    Hi all,
    I've just built this B737 gear lever for Bob Reed and thought I would share the design for anyone who wants to copy it!



    Regards,

    Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  2. #2
    150+ Forum Groupie XOrionFE's Avatar
    Join Date
    Jan 2008
    Location
    Sugar Grove, IL
    Posts
    264
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Wow,

    Your'e a master! That is beautiful. Did you turn that handle yourself or did you use something that was available?

    If the former, I keep thinking I need to add a couple metal working pieces of equipement to my shop. I have a pretty extensive woodworking shop but nothing for metal working (hobbiest only). I am wondering what some essentials might be. I keep thinking a small mill, lathe, and bandsaw for cutting metal but not sure.

    Scott

  3. Thanks garrettgauci thanked for this post
  4. #3
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,415
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by XOrionFE View Post
    Wow,

    Your'e a master! That is beautiful. Did you turn that handle yourself or did you use something that was available?

    If the former, I keep thinking I need to add a couple metal working pieces of equipement to my shop. I have a pretty extensive woodworking shop but nothing for metal working (hobbiest only). I am wondering what some essentials might be. I keep thinking a small mill, lathe, and bandsaw for cutting metal but not sure.

    Scott
    Hi Scott,
    I have a small chinese metal lathe and I am a machinist by trade. The handle is some 10mm & 6mm clear perspex superglued together then turned. The wheel holder is machined from solid 30mm pvc and painted. It screws on to the 14mm shaft so it can be fitted after the bracket is installed to the MIP. The clear perspex wheels are pretty quick and easy to make, I might add them to the product range!

    Cheers, Gwyn
    Last edited by Westozy; 10-05-2008 at 07:56 AM.

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  5. #4
    Boeing 777 Builder


    Kennair's Avatar
    Join Date
    Jan 2007
    Location
    Perth, Western Australia
    Posts
    730
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Beautiful work Gwyn. Wow more designs I can steal, I mean copy

    Ken.
    Opencockpits | Aerosim Solutions | Sim-Avionics | P3D | FDS | FTX | AS16 | PPL | Kennair


  6. #5
    150+ Forum Groupie XOrionFE's Avatar
    Join Date
    Jan 2008
    Location
    Sugar Grove, IL
    Posts
    264
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by Westozy View Post
    Hi Scott,
    I have a small chinese metal lathe and I am a machinist by trade. The handle is some 10mm & 6mm clear perspex superglued together then turned. The wheel holder is machined from solid 30mm pvc and painted. It screws on to the 14mm shaft so it can be fitted after the bracket is installed to the MIP. The clear perspex wheels are pretty quick and easy to make, I might add them to the product range!

    Cheers, Gwyn
    Well, I am sure it would be much less expensive for you to make and us to buy then it would be for someone like me to acquire equipment, learn how to use, make tons of mistakes, waste lots of time and material, etc......

    Maybe thats the best route!

  7. #6
    Executive Vice President, MyCockpit


    Matt Olieman's Avatar
    Join Date
    Oct 2005
    Location
    Ocala, FL USA
    Posts
    2,884
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Gwyn, beautiful workmanship and an excellent design. You're a true gift to our fellow builders Gwyn. Thanks for sharing your design

    Matt Olieman

  8. #7
    2000+ Poster - Never Leaves the Sim Trevor Hale's Avatar
    Join Date
    Nov 2005
    Location
    Ontario, Canada
    Posts
    2,223
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Top notch quality Gwyn.. Just as I would come to expect from your hands. Great stuff.

    Trev
    ________________________
    Trevor Hale

  9. #8
    1000+ Poster - Fantastic Contributor Bob Reed's Avatar
    Join Date
    Oct 2005
    Location
    Holley, New York U.S.A.
    Posts
    1,776
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    WOW!!!! Been a very busy weekend so this is the first I have really had to log in... I am speechless... AWSOME!!!!!!! I can not wait to get this mounted in the cockpit!
    Bob Reed

  10. #9
    300+ Forum Addict jmig's Avatar
    Join Date
    Apr 2007
    Location
    Lafayette, LA USA
    Posts
    422
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    My gear handle, which used an 1/2 aluminum U channel for the handle broke where I drilled the handle to run the 1/4 pivot bolt through. So I have to rebuild it.

    I like the internal design of yours Gwyn more than mine. With your permission I will borrow it.
    John

    System:
    ASUS P5Q SE/R
    Intel Q9550 O/C to 3.4 GHz
    4 GB 1066 DDR2 RAM
    300 GB WD 10,000 RPM Raptor SATA Drive
    GeForce 8800 GT 512 KB RAM
    Matrox TH2Go with three 19" Sumsung 940 BX
    IR Track 4

  11. #10
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,415
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by jmig View Post
    My gear handle, which used an 1/2 aluminum U channel for the handle broke where I drilled the handle to run the 1/4 pivot bolt through. So I have to rebuild it.

    I like the internal design of yours Gwyn more than mine. With your permission I will borrow it.

    No problems at all, go for it!!!

    Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  12. Thanks hghpandaman thanked for this post
Page 1 of 3 123 LastLast

Similar Threads

  1. Gear Lever measurements
    By mpl330 in forum General Builder Questions All Aircraft Types
    Replies: 2
    Last Post: 05-26-2013, 03:21 PM
  2. B737 NG Gear lever
    By archen in forum General Builder Questions All Aircraft Types
    Replies: 4
    Last Post: 01-25-2011, 07:00 AM
  3. build your own 737 gear lever
    By esa1203 in forum General Builder Questions All Aircraft Types
    Replies: 1
    Last Post: 06-26-2007, 07:09 AM