Results 1 to 4 of 4
  1. #1
    25+ Posting Member Willow's Avatar
    Join Date
    Jul 2011
    Location
    Hobart, Tasmania Australia
    Posts
    31
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Question CP Flight Pro MCP connection issues ?

    Hi;

    I'm using the CP Flight MCP Pro with EFIS (brand new). Computer is running Win 7 64 bit.

    I'm having connection issues. The PC will not recogonise the MCP.

    Sodtware and drivers installed and cables and power pack are OK.

    I've exhasuted all known options.

    Perhaps someone has had the same issue and can help me. Thank you, Iain
    Iain Williams (aka WiloW)
    http://www.Flaps2Approach.com

  2. #2
    500+ This must be a daytime job
    Join Date
    Jul 2013
    Posts
    948
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: CP Flight Pro MCP connection issues ?

    Is it connected to the pc via a USB hub, if so, suggest you try connecting direct to one of the pc motherboard USB sockets. If you have a hub, is it powered?

    David

  3. #3
    25+ Posting Member Willow's Avatar
    Join Date
    Jul 2011
    Location
    Hobart, Tasmania Australia
    Posts
    31
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: CP Flight Pro MCP connection issues ?

    Quote Originally Posted by fordgt40 View Post
    Is it connected to the pc via a USB hub, if so, suggest you try connecting direct to one of the pc motherboard USB sockets. If you have a hub, is it powered?

    David
    Hi David - thanks for the note. It is connected to motherboard USB, not powered hub, Iain
    Iain Williams (aka WiloW)
    http://www.Flaps2Approach.com

  4. #4
    300+ Forum Addict oal331's Avatar
    Join Date
    Dec 2006
    Location
    Athens - Greece
    Posts
    405
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: CP Flight Pro MCP connection issues ?

    Hi,

    what else to try:
    1) connect it to to other USB ports
    2) use a usb switch hub with power supply, (not simple one)
    3) unistall all CpFlight's drivers, remove the MCP and install them again as administrator, then connect the MCP first, after it works the EFIS
    4) check the motherboard's chipset drivers, install new drivers if any, check computer's hardware for any issues
    5) change usb cable
    6) ry another pc, to see if the problem remains, so contant CpFlight fot support.

    Good luck

    Eddie
    Eddie Armaos
    Athens-Greece


    [