Hi Dave,

Not sure about phidgets cards as I don't use them but i guess as long as you can control separate outputs it will be ok...
If you have a test meter you should be able to check the inputs and switches work the same as mine, even with my test meter it was making the led's light up so will have to get some resistors in use for these leds. I took the original cable with connector and then split the other end into the separate strands to connect to the OC card. With the bodnar board you can either use it for inputs in a matrix style or have a simpler 12 inputs (depending on which card you have) - Leo's site has more information about how to connect them.
Yes Pol are a real pain on support and even sales is not good as I was going to buy another item but have not had a response as usual!

Cheers
Mike