Need help with Fire panel

[JWS]

I built it according with the instructions given by Jacob from POLDRAGONET, here is the video.

http://www.youtube.com/watch?v=e1_v5yiBfIk

Thanks, I'll have a look. Can you relay the instructions that you have been given?

Thanks,

JWS

[JWS]

Hi

Attachment 5292

I glued the back panel straight onto the main panel, maybe the annunciators is too high, but in my case that is fine.

And as said previously all white film needs to be taken off. Can't remember that the red handles had any.

The rotary switches has to be set for 3 positions, and even if the rings have a D shape I pushed them on the shaft. And as you see from the picture I glued them together to with the handle to keep it strong.

And with lights it is not that important for us, but I have seen an solution where red LEDs where actually put on the pedestal side, then they light up the handle. Sorry have no picture of this. Will use white LEDs in the case for backlighs.

Regards

RG

Hi RG,

Thanks for the picture. It makes me wonder if I am missing a few items. In the picture I see that underneath the handle there are 2 rings, 1 larger and 1 smaller. I seem to have only the small ones. Can you confirm that you received 6 rings (3 large/3 small) from Poldragonet?

JWS

[ricgj]

Hi

Yes 2 rings for each handle.

RG