Results 1 to 5 of 5
Thread: SIOC Audio Panel Code
-
05-08-2011, 06:19 PM #1
- Join Date
- Dec 2006
- Location
- USA
- Posts
- 127
SIOC Audio Panel Code
Hello,
I have run in a sioc Coding problem and am looking for suggestions to try. I would like to set up the SIOC code so that when both Com1 & Com2 are pushed , Both radios can be heard (sounds simply??).
The trouble is the audio panel is from a real aircraft, and both com1 and com2 are latching type switches (P type).
The offset for these are $3122, with bytes 7, 6, & 5 involved.
COM1 transmit Byte 7
COM2 transmit Byte 6
COM receive both Byte 5
Is there a statement in SIOC that allows "If" switch A is pressed "and" switch b is press that Offset $ 3122 with be switch to byte 5?
~Polmer
-
05-08-2011, 10:38 PM #2
- Join Date
- Apr 2009
- Location
- Toronto
- Posts
- 125
Re: SIOC Audio Panel Code
Hello Polmer.
You could construct a single IF test:
Code:. . C0 = &SwitchA = 1 C1 = &SwitchB = 1 C0 = C0 AND C1 IF C0 = 1 { ....set bit 5 } . .
Code:. . IF &SwitchA = 1 { IF &SwitchB = 1 { set bit 5 } } . .
Jim
-
05-11-2011, 08:33 PM #3
- Join Date
- Dec 2006
- Location
- USA
- Posts
- 127
Re: SIOC Audio Panel Code
Yes you are correct,
the switches are type I, not type "P".
I tried both variation of the code but cant get both Com1 & Com2 to be on at the same time. Heres what I am running now with no luck....
HTML Code:Var 1042, Link FSUIPC_IN, Offset $3122, Length 1 // Radio Audio Bytes Var 1034, Link FSUIPC_OUT, Offset $3122, Length 1 // Radio Audio Bytes Var 1035, Link IOCARD_SW, Input 111, Type I // COM1 Audio { V1034 = CHANGEBIT 7 ,V1035 // COM1 vs COM2 } Var 1036, Link IOCARD_SW, Input 109, Type I // COM2 Audio { V1034 = CHANGEBIT 6 ,V1036 } Var 1038, Link IOCARD_SW, Input 108, Type I // NAV1 Audio { V1034 = CHANGEBIT 4 ,V1038 } Var 1039, Link IOCARD_SW, Input 115, Type I // NAV2 Audio { V1034 = CHANGEBIT 3 ,V1039 } Var 1040, Link IOCARD_SW, Input 116, Type I // MKR Audio { V1034 = CHANGEBIT 2 ,V1040 } Var 1041, Link IOCARD_SW, Input 110, Type I // ADF Audio { V1034 = CHANGEBIT 0 ,V1041 } Var 1043, Link IOCARD_SW, Input 108, Type I { &FO_JoyStick64 = CHANGEBIT 3 ,V1043 // toggle bit 0 of joystick 64 } Var 1044, name FO_JoyStick64, Link FSUIPC_OUT, Offset $3340, Length 4 Var 1046 { IF V1035 = 1 { IF V1036 = 1 { V1047 = 1 } } } Var 1047 { V1034 = CLEARBIT 7 V1034 = CLEARBIT 6 V1034 = CHANGEBIT 5 ,V1047 }
-
05-11-2011, 11:08 PM #4
- Join Date
- Apr 2009
- Location
- Toronto
- Posts
- 125
Re: SIOC Audio Panel Code
Hello Polmer,
The script attached to V1046 is never executed as the variable is never changed. Consequently, V1047 never changes.
You can set the "receive both" flag without using an explicit "IF"
Code:Var 1034, Link FSUIPC_OUT, Offset $3122, Length 1 // Radio Audio Bits Var 1035, Link IOCARD_SW, Input 111, Type I // COM1 Audio { V1034 = CHANGEBIT 7 ,V1035 // COM1 vs COM2 CALL V1046 } Var 1036, Link IOCARD_SW, Input 109, Type I // COM2 Audio { V1034 = CHANGEBIT 6 ,V1036 CALL V1046 } Var 1046 Link SUBRUTINE { //* Set "receive both" if both switches pressed //* Else, clear the flag L0 = V1035 AND V1036 // L0 = 1 iff COM1 and COM2 are both on V1034 = CHANGEBIT 5, L0 }
Jim
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Dislikes
-
05-12-2011, 08:18 PM #5
- Join Date
- Dec 2006
- Location
- USA
- Posts
- 127
Re: SIOC Audio Panel Code
Jim,
It works like a charm with your code!
Thanks for the help with this.....much apreciated.
~Polmer
Free connections, find your partner with no obligations Real-life Girls Exemplary Сasual Dating
Super Сasual Dating - Verified...