Results 1 to 3 of 3
  1. #1
    150+ Forum Groupie mrmaster's Avatar
    Join Date
    Nov 2010
    Location
    Europe
    Posts
    167
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Question about SIOC and Mac

    Hello,

    I know that you can't use SIOC with Xplane on a Mac but i found the very useful Plugin UIPCX from fransedano.net. Now my question: Would it be possible to:
    1. Use a second Computer networked and running Windows with SIOC to control I/O ?
    2. Can SIOC use inputs from the Bu0836X ?
    3. only hypothetically - can SIOC send output to an Arduino?

    Regards,
    Marc

  2. #2
    10+ Posting Member
    Join Date
    Mar 2010
    Location
    Lusaka, Zambia
    Posts
    11
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Question about SIOC and Mac

    mrmaster, I can answer Yes to item 1. I tried it with sioc on windows XP to which are connected usb exp card and master card with the mac running IOCP server. The sioc.ini file needs to be told about the IP address of the Mac. relevant extract from sioc.ini:

    ------------------------/snip------------

    [************** IOCP CLIENT MODULE #0 ***************]

    [ Desactivar el módulo cliente IOCP ]
    [ Disable IOCP client module ]
    IOCPclient0_disable=no << its enabled

    [ IP del servidor donde debe de conectar el cliente ]
    [ IOCP client host name ]
    [IOCPclient0_host=localhost]
    IOCPclient0_host=172.17.40.11 << this is the mac ip address

    ----------------//snip---------------------------------------------

  3. #3
    10+ Posting Member
    Join Date
    Mar 2010
    Location
    Lusaka, Zambia
    Posts
    11
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Question about SIOC and Mac

    mrmaster, I can answer Yes to item 1. I tried it with sioc on windows XP to which are connected usb exp card and master card with the mac running IOCP server. The sioc.ini file needs to be told about the IP address of the Mac. relevant extract from sioc.ini:

    ------------------------/snip------------

    [************** IOCP CLIENT MODULE #0 ***************]

    [ Desactivar el módulo cliente IOCP ]
    [ Disable IOCP client module ]
    IOCPclient0_disable=no << its enabled

    [ IP del servidor donde debe de conectar el cliente ]
    [ IOCP client host name ]
    [IOCPclient0_host=localhost]
    IOCPclient0_host=172.17.40.11 << this is the mac ip address

    ----------------//snip---------------------------------------------