Results 1 to 6 of 6
  1. #1
    Warren fsaviator's Avatar
    Join Date
    Dec 2008
    Location
    Dupont, WA
    Posts
    489
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Metal Working advice on B737 Cockpit

    Hello all,
    almost time to go home and get back to work on the Sim. Some changes have resulted in my having to relocate the current build, so I now have the chance to rewind and take different approach to things.

    I'm looking to build a metal framework using square and rectangular tube steel to support sim, as well ensure it fits in the area's available to me.

    My question is, I drew up the initial sketches using 2" x 2" (50cm x 50cm) diameter tubing. Is this overkill?

    I tend to over-engineer things so it's possible. Does anyone have any experience with this approach, and if I could get by with 1.5" x 1.5".



    Thanks,

    Warren

  2. #2
    75+ Posting Member TobiBS's Avatar
    Join Date
    Feb 2008
    Location
    Germany
    Posts
    82
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Metal Working advice on B737 Cockpit

    Quote Originally Posted by fsaviator View Post
    My question is, I drew up the initial sketches using 2" x 2" (50cm x 50cm) diameter tubing. Is this overkill?
    I am sorry that I can not help you here, but not to confuse our metric friends, I guess you meant either 50mm or 5cm, right?

  3. #3
    25+ Posting Member
    Join Date
    Dec 2008
    Location
    Poland
    Posts
    30
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Metal Working advice on B737 Cockpit

    I drew up the initial sketches using 2" x 2" (50cm x 50cm)
    50cm x 50cm is an overkill I'd say I'm afraid it won't remain any place for your sim after building your structure with such a giant tubes.
    50mm x 50mm is also a little bit of overestimation considering steel as a material, but just a little IMHO.
    For sure you won't suffer any instability using 1.5" x 1.5" steel if you plan proper structure reinforcements.

    Speaking of building: could you please share more visualisations of your shell?
    It's pretty neat conception of a simple yet ellegant shell

  4. #4
    500+ This must be a daytime job Sean Nixon's Avatar
    Join Date
    Jun 2008
    Location
    EGNT
    Posts
    678
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Metal Working advice on B737 Cockpit

    Hi Warren

    I started to build a similar framework as you in the earlier days before my FDS shell. At first I used 41x41mm steel unistrut, a popular product here in the UK...

    http://www.unistrut.co.uk/index.php?...Double Channel

    It was very solid, but I thought it was an overkill.

    Anyway, I got hold of some Hilti alternative, at 30x30mm much easier to work with, and just as solid...

    http://www.hilti.co.uk/holuk/page/mo...&nodeId=-98182

    Bear in mind, the FDS shell doesn't use any skelton, and once all bolted together, it too is earthquake proof!

    They are my experiences, hope you can take something from it.

    Sean

  5. #5
    150+ Forum Groupie


    steveeverson's Avatar
    Join Date
    Nov 2007
    Location
    Lancashire UK
    Posts
    210
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Metal Working advice on B737 Cockpit

    Hi there, I built my frame using 20mm x 20 mm steel box section welded together and its really solid. I then fixed my home built interior liners to it. http://m.flickr.com/#/photos/59441636@N08/5434593550/ . I think the key is to design it well with adequate bracing rather than heavy box section and it will then stay rigid but fairly light.
    Cheers Steve
    Last edited by steveeverson; 04-26-2011 at 12:37 PM. Reason: fixing link
    another bedroom boeing.....

  6. #6
    75+ Posting Member Steve1970's Avatar
    Join Date
    Oct 2009
    Location
    uk
    Posts
    132
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Metal Working advice on B737 Cockpit

    Hi Warren

    This is massive overkill, you would get away with 20-25mm box section (3/4-1"). You could also mill out triangular flat plates to screw them together and avoid welding.

    Cheers
    Steve.

    PS I use Metalsupermarket to source all of my pre-cut material, they are a US company also operating in the UK, they will cut your material to the length you need, not the cheapest, but no nonsense service.