Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    25+ Posting Member
    Join Date
    May 2010
    Location
    FRANCE
    Posts
    41
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    new install, new start

    hello kiek,
    i have done a new install , and new start...
    here is my sioc.ini


    [SIOC]
    IOCP_port=8092
    IOCP_timeout=4000
    Minimized=Yes
    toggle_delay=20
    CONFIG_FILE=c:\lekseecon\cockpit767\cockpit767.ssi

    [IOCARDS MODULE]
    IOCard_disable=No
    IOCard_LPT=No

    [MASTERS]
    MASTER=0,4,2,80
    MASTER=1,4,1,92


    [USBKEYS]
    USBKeys=4,47

    [FSUIPC MODULE]
    FSUipcdisable=No
    FSUipcRefresh=60

    [IOCP CLIENTS MODULES]
    IOCPini_delay=3000
    IOCPclient0_disable=Yes
    IOCPclient0_host=localhost
    IOCPclient0_port=8091
    IOCPclient1_disable=Yes
    IOCPclient1_host=localhost
    IOCPclient1_port=8092

    [SOUND MODULE]
    Sound_disable=Yes
    Volume=100


    when i start lekseecon, i have this error message:

    Error6:CONFIG_file not found or empty.
    Help: Is the CONFIG_FILE parameter in your lekseecon.ini file correct?


    here is my lekseecon.ini file:

    LOG_FROM_SIOC=1
    LOG_TO_LEVELD=1

    here is lekseecon.log:
    lekseecon version 7.2
    Sat Apr 09 00:00:55 2011

    C:\Program Files (x86)\IOCards\SIOC\sioc.ini found.
    PORT=8092
    CONFIG_FILE=C:\Program Files (x86)\IOCards\SIOC\c:\lekseecon\cockpit767\cockpit767.ssi

    lekseecon.ini found:
    LOG_FROM_SIOC=1
    LOG_TO_SIOC=0
    LOG_TO_LEVELD=1

    Settings parameters taken:
    HOSTADDRESS=127.0.0.1
    PORT=8092
    CONFIG_FILE=C:\Program Files (x86)\IOCards\SIOC\c:\lekseecon\cockpit767\cockpit767.ssi

    Error 6: CONFIG_FILE not found or empty.

    Help: Is the CONFIG FILE parameter in your lekseecon.ini file correct?
    lekseecon Stopped.
    Sat Apr 09 00:04:33 2011


    regards..

  2. #2
    25+ Posting Member
    Join Date
    May 2010
    Location
    FRANCE
    Posts
    41
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    that's ok now

  3. #3
    25+ Posting Member
    Join Date
    May 2010
    Location
    FRANCE
    Posts
    41
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    so, to finish my MCP i need some help...
    here is my script: all is working fine, but when i when to include display and rotary for MCP it doesn't work... they are all on the same master card , device 1....
    May you help me..
    regards


    ///////////////////////////////////////////////////////////////////////////////////////////////

    /////////////////////////////////
    //
    // My level-D 767 cockpit
    //
    // for SIOC 3.7B1 beta1 and LEKSEECON v7.2
    //
    // Nico Kaan
    // The Netherlands
    // www.nicokaan.nl
    // email: flightsim@nicokaan.nl
    //*********************************************************************************************

    ********************************
    //
    // Eric IM 09 April 2011
    //
    //*********************************************************************************************

    ********************************
    //
    // CONTENTS:
    //
    // Opencockpits SIOC code for the LevelD 767-300.
    //
    //***************************************************************************



    //--------------------------------------------------------------------

    // Korries:

    Var 275 Static name CMDLBut Link IOCARD_SW Device 1 Input 57 Type P
    Var 276 Static name CMDCBut Link IOCARD_SW Device 1 Input 58 Type P
    Var 277 Static name CMDRBut Link IOCARD_SW Device 1 Input 55 Type P
    Var 278 Static name MachSel Link IOCARD_SW Device 1 Input 50 Type P
    Var 279 Static name SpdIntBut Link IOCARD_SW Device 1 Input 39 Type P
    Var 280 Static name N1But Link IOCARD_SW Device 1 Input 44 Type P
    Var 281 Static name SpdBut Link IOCARD_SW Device 1 Input 39 Type P
    Var 282 Static name ALTHLDBut Link IOCARD_SW Device 1 Input 54 Type P
    Var 283 Static name HdgHldBut Link IOCARD_SW Device 1 Input 37 Type P
    Var 285 Static name LNAVBut Link IOCARD_SW Device 1 Input 61 Type P
    Var 286 Static name VNAVBut Link IOCARD_SW Device 1 Input 40 Type P
    Var 287 Static name FLCHBut Link IOCARD_SW Device 1 Input 38 Type P
    Var 289 Static name LOCBut Link IOCARD_SW Device 1 Input 62 Type P
    Var 290 Static name APPBut Link IOCARD_SW Device 1 Input 59 Type P
    Var 291 Static name VSBut Link IOCARD_SW Device 1 Input 60 Type P


    // ************************************************************************

    Var 742 Static
    {
    // set leds to the actual value
    &O_CMDLLed = TESTBIT v742 0
    &O_CMDCLed = TESTBIT v742 1
    &O_CMDRLed = TESTBIT v742 2
    &O_LNAVLed = TESTBIT v742 6
    &O_VNAVLed = TESTBIT v742 7
    &O_FLCHLed = TESTBIT v742 8
    &O_HDGHLDLed = TESTBIT v742 9
    &O_VSLed = TESTBIT v742 10
    &O_ALTHLDled = TESTBIT v742 11
    &O_LOCLed = TESTBIT v742 12
    &O_APPLed = TESTBIT v742 13
    &O_N1Led = TESTBIT v742 15
    &O_SPDLed = TESTBIT v742 16

    }

    var 9001 name O_N1Led Link IOCARD_OUT Device 1 Output 34
    var 9002 name O_SPDLed Link IOCARD_OUT Device 1 Output 33
    var 9003 name O_LNAVLed Link IOCARD_OUT Device 1 Output 28
    var 9004 name O_VNAVLed Link IOCARD_OUT Device 1 Output 32
    var 9005 name O_FLCHLed Link IOCARD_OUT Device 1 Output 30
    var 9006 name O_HDGHLDLed Link IOCARD_OUT Device 1 Output 31
    var 9007 name O_VSLed Link IOCARD_OUT Device 1 Output 26
    var 9008 name O_ALTHLDLed Link IOCARD_OUT Device 1 Output 25
    var 9010 name O_LOCLed Link IOCARD_OUT Device 1 Output 29
    var 9011 name O_APPLed Link IOCARD_OUT Device 1 Output 27
    var 9012 name O_CMDLLed Link IOCARD_OUT Device 1 Output 24
    var 9013 name O_CMDCLed Link IOCARD_OUT Device 1 Output 22
    var 9014 name O_CMDRLed Link IOCARD_OUT Device 1 Output 23
    var 9016 name O_MACHDP Link IOCARD_OUT Device 1 Output 37

    // ************************************************************************
    // switches

    Var 292 Static name ATSwitch Link IOCARD_SW Device 1 Input 43 Type I
    Var 293 Static name DisEngBar Link IOCARD_SW Device 1 Input 71 Type P
    Var 294 Static name CapFD Link IOCARD_SW Device 1 Input 42 Type I
    Var 295 Static name FOFD Link IOCARD_SW Device 1 Input 56 Type P


    // ************************************************************************
    // IRS

    var 700


    Var 13 STATIC Link IOCARD_SW Input 122 Type I // TKGS
    Var 14 STATIC Link IOCARD_SW Input 121 Type I // PPos
    Var 15 STATIC Link IOCARD_SW Input 120 Type I // WIND
    Var 16 STATIC Link IOCARD_SW Input 119 Type I // HEADING

    Var 18 STATIC Link IOCARD_SW Input 137 Type I // SDSL
    Var 19 STATIC Link IOCARD_SW Input 138 Type I // SDSC
    Var 20 STATIC Link IOCARD_SW Input 136 Type I // SDSR

    Var 22 STATIC Link IOCARD_SW Input 124 Type I // IRU1 Off
    Var 23 STATIC Link IOCARD_SW Input 125 Type I // IRU1 Align
    Var 24 STATIC Link IOCARD_SW Input 123 Type I // IRU1 Nav

    Var 27 STATIC Link IOCARD_SW Input 83 Type I // IRU2 Off
    Var 28 STATIC Link IOCARD_SW Input 82 Type I // IRU2 Align
    Var 29 STATIC Link IOCARD_SW Input 81 Type I // IRU2 Nav

    Var 32 STATIC Link IOCARD_SW Input 104 Type I // IRU3 Off
    Var 33 STATIC Link IOCARD_SW Input 100 Type I // IRU3 Align
    Var 34 STATIC Link IOCARD_SW Input 103 Type I // IRU3 Nav


    // ************** 2.2 yaw damper**********************

    // 2.2 Yaw Damper

    Var 701 STATIC



    Var 39 Static Link IOCARD_SW Input 64 Type P

    Var 40 Static Link IOCARD_SW Input 65 Type P

    // ************** 2.3 EEC**********************

    Var 878 name O_EEC_LFT



    Var 43 Static Link IOCARD_SW Input 63 Type P
    Var 44 Static Link IOCARD_SW Input 45 Type P

    // 2.4 Hydraulics


    Var 703 Static
    {
    &O_LftSysPrs = TESTBIT v703 0
    &O_CtrSysPrs = TESTBIT v703 1
    &O_RgtSysPrs = TESTBIT v703 2
    &O_LPO = TESTBIT v703 6
    &O_CE1PO = TESTBIT v703 7
    &O_CE2PO = TESTBIT v703 8
    &O_RPO = TESTBIT v703 9
    &O_LftAuxPrs = TESTBIT v703 10
    &O_CtrAuxPrs = TESTBIT v703 11
    &O_RgtAuxPrs = TESTBIT v703 12
    &O_LPOn = TESTBIT v703 13
    &O_CE1POn = TESTBIT v703 14
    &O_CE2POn = TESTBIT v703 15
    &O_RPOn = TESTBIT v703 16
    }

    Var 2380 name O_LftSysPrs Link IOCARD_OUT Output 166
    Var 2381 name O_CtrSysPrs Link IOCARD_OUT Output 169
    Var 2382 name O_RgtSysPrs Link IOCARD_OUT Output 168

    Var 2383 name O_LPOn Link IOCARD_OUT Output 111
    Var 2384 name O_CE1POn Link IOCARD_OUT Output 110
    Var 2385 name O_CE2POn Link IOCARD_OUT Output 109
    Var 2386 name O_RPOn Link IOCARD_OUT Output 108

    Var 2387 name O_LPO Link IOCARD_OUT Output 107
    Var 2388 name O_CE1PO Link IOCARD_OUT Output 105
    Var 2389 name O_CE2PO Link IOCARD_OUT Output 106
    Var 2390 name O_RPO Link IOCARD_OUT Output 104

    Var 2391 name O_LftAuxPrs Link IOCARD_OUT Output 100
    Var 2392 name O_CtrAuxPrs Link IOCARD_OUT Output 103
    Var 2393 name O_RgtAuxPrs Link IOCARD_OUT Output 101



    Var 49 Static Link IOCARD_SW Input 47 Type P // L HYD PUMP
    Var 50 Static Link IOCARD_SW Input 46 Type P // C1 HYD PUMP
    Var 51 Static Link IOCARD_SW Input 49 Type P // C2 HYD PUMP
    Var 52 Static Link IOCARD_SW Input 48 Type P // R HYD PUMP

    Var 53 Static Link IOCARD_SW Input 73 Type I // L AUX PUMP Off
    Var 54 Static Link IOCARD_SW Input 74 Type I // L AUX PUMP Aut
    Var 55 Static Link IOCARD_SW Input 75 Type I // L AUX PUMP On

    Var 57 Static Link IOCARD_SW Input 91 Type I // C AUX PUMP Off
    Var 58 Static Link IOCARD_SW Input 93 Type I // C AUX PUMP Aut
    Var 59 Static Link IOCARD_SW Input 90 Type I // C AUX PUMP On

    Var 61 Static Link IOCARD_SW Input 78 Type I // R AUX PUMP Off
    Var 62 Static Link IOCARD_SW Input 77 Type I // R AUX PUMP Aut
    Var 63 Static Link IOCARD_SW Input 76 Type I // R AUX PUMP On





    //**********2.7 Battery & Standby power*****************

    Var 705 Static
    {
    &O_BatDisch = TESTBIT v705 0
    &O_ApuBatDisch = TESTBIT v705 1
    &O_BatSwitch = TESTBIT v705 2
    &O_StbyOff = TESTBIT v705 4
    }

    Var 2650 name O_BatSwitch Link IOCARD_OUT Output 26
    Var 2651 name O_BatDisch Link IOCARD_OUT Output 31

    Var 2652 name O_ApuBatDisch Link IOCARD_OUT Output 30
    Var 2653 name O_StbyOff Link IOCARD_OUT Output 29


    Var 70 Static Link IOCARD_SW Input 54 Type P // BatSwitch
    Var 73 Static Link IOCARD_SW Input 53 Type I // StbyPowBat
    Var 72 Static Link IOCARD_SW Input 52 Type I // StbyPowAuto

    //**********2.8 Electrics*****************

    Var 706 Static
    {
    &O_ExtPowAvail = TESTBIT v706 0
    &O_ExtPowOn = TESTBIT v706 1
    &O_ApuGenPush = TESTBIT v706 2
    &O_BusLftOff = TESTBIT v706 8
    &O_LftUtlOff = TESTBIT v706 9
    &O_RgtUtlOff = TESTBIT v706 11
    &O_BusRgtOff = TESTBIT v706 13
    &O_LftGenPush = TESTBIT v706 14
    &O_LftGenOff = TESTBIT v706 15
    &O_LftDrive = TESTBIT v706 17
    &O_RgtDrive = TESTBIT v706 19
    &O_RgtGenPush = TESTBIT v706 20
    &O_RgtGenOff = TESTBIT v706 21
    }

    Var 2654 name O_ExtPowOn Link IOCARD_OUT Output 81
    Var 2655 name O_ExtPowAvail Link IOCARD_OUT Output 78
    Var 2656 name O_ApuGenPush Link IOCARD_OUT Output 76
    Var 2657 name O_ApuGenOff Link IOCARD_OUT Output 80
    Var 2658 name O_TLftIslAuto Link IOCARD_OUT Output 77
    Var 2659 name O_TRgtIslAuto Link IOCARD_OUT Output 79

    Var 2660 name O_BusLftOff Link IOCARD_OUT Output 84

    Var 2661 name O_LftUtlOff Link IOCARD_OUT Output 85
    Var 2662 name O_RgtUtlOff Link IOCARD_OUT Output 86

    Var 2663 name O_BusRgtOff Link IOCARD_OUT Output 83

    Var 2664 name O_LftGenPush Link IOCARD_OUT Output 87
    Var 2665 name O_LftGenOff Link IOCARD_OUT Output 90
    Var 2666 name O_LftDrive Link IOCARD_OUT Output 91
    Var 2667 name O_RgtDrive Link IOCARD_OUT Output 89
    Var 2668 name O_RgtGenPush Link IOCARD_OUT Output 88
    Var 2669 name O_RgtGenOff Link IOCARD_OUT Output 93

    Var 75 Static Link IOCARD_SW Input 111 Type P // ApuGen
    Var 76 Static Link IOCARD_SW Input 114 Type P // ExtPower
    Var 77 Static Link IOCARD_SW Input 117 Type P // LftBusTie
    Var 78 Static Link IOCARD_SW Input 116 Type P // RgtBusTie
    Var 79 Static Link IOCARD_SW Input 113 Type P // LftUtil
    Var 80 Static Link IOCARD_SW Input 109 Type P // RgtUtil
    Var 81 Static Link IOCARD_SW Input 110 Type P // LftEngGen
    Var 82 Static Link IOCARD_SW Input 115 Type P // LftDrvDisc
    Var 83 Static Link IOCARD_SW Input 112 Type P // RgtDrvDisc
    Var 84 Static Link IOCARD_SW Input 108 Type P // RgtEngGen

    //**********2.9 Apu Controls*****************


    Var 707 Static
    {
    &O_ApuRun = TESTBIT v707 0
    &O_ApuFault = TESTBIT v707 1
    }

    Var 2670 name O_ApuRun Link IOCARD_OUT Output 94
    Var 2671 name O_ApuFault Link IOCARD_OUT Output 95

    Var 85 static Link IOCARD_SW Input 139 Type I // ApuSOff
    Var 86 Static Link IOCARD_SW Input 141 Type I // ApuSOn
    Var 87 Static Link IOCARD_SW Input 140 Type I // ApuStart

    //*************2.12 Ram Air Turbine*************


    Var 711 STATIC

    Var 93 STATIC Link IOCARD_SW Input 35 Type I // RamUnlkd



    //**********2.13 Engine Start Controls*****************



    Var 94 Static Link IOCARD_SW Input 50 Type p // LStartGnd
    Var 100 Static Link IOCARD_SW Input 51 Type P // RStartGnd

    Var 95 STATIC Link IOCARD_SW Input 131 Type I // LStartAuto
    Var 96 STATIC Link IOCARD_SW Input 133 Type I // LStartOff

    Var 101 STATIC Link IOCARD_SW Input 126 Type I // RStartAuto
    Var 102 STATIC Link IOCARD_SW Input 128 Type I // RStartOff

    Var 106 Static Link IOCARD_SW Input 95 Type P // Igniter1
    Var 108 Static Link IOCARD_SW Input 94 Type p // Igniter2

    Var 0012, Link IOCARD_OUT, Output 23

    Var 582, Link IOCARD_SW, Input 56, Type I
    {
    IF V582 = 1
    {
    V583 = 1
    }
    ELSE
    {
    V583 = 0
    }
    }

    Var 583, Link IOCARD_OUT, Output 20

    Var 586, Link IOCARD_SW, Input 57, Type I
    {
    IF V586 = 1
    {
    V587 = 1
    }
    ELSE
    {
    V587 = 0
    }
    }

    Var 587, Link IOCARD_OUT, Output 27


    //**********2.15 Fuel Controls : switches*****************


    Var 715 Static
    {
    &O_LftAftPrs = TESTBIT v715 0
    &O_LftFwdPrs = TESTBIT v715 1
    &O_RgtAftPrs = TESTBIT v715 2
    &O_RgtFwdPrs = TESTBIT v715 3
    &O_LftCtrPrs = TESTBIT v715 4
    &O_RgtCtrPrs = TESTBIT v715 5

    &O_Lftafton = TESTBIT v715 6
    &O_lftfwdon = TESTBIT v715 7

    &O_Rgtafton = TESTBIT v715 8
    &O_rgtfwdon = TESTBIT v715 9

    &O_LftCtron = TESTBIT v715 10
    &O_RgtCtron = TESTBIT v715 11

    &O_XfeedUp = TESTBIT v715 12
    &O_XfeedLo = TESTBIT v715 13
    &O_FuelConfig = TESTBIT v715 14

    &O_Xfeedupvalve = TESTBIT v715 15
    &O_Xfeedlovalve = TESTBIT v715 16
    }

    Var 2780 name O_LftAftPrs Link IOCARD_OUT Output 39
    Var 2781 name O_RgtAftPrs Link IOCARD_OUT Output 32
    Var 2782 name O_LftFwdPrs Link IOCARD_OUT Output 46
    Var 2783 name O_RgtFwdPrs Link IOCARD_OUT Output 45

    Var 2784 name O_LftCtrPrs Link IOCARD_OUT Output 33
    Var 2785 name O_RgtCtrPrs Link IOCARD_OUT Output 34

    Var 2786 name O_XfeedUp Link IOCARD_OUT Output 40
    Var 2787 name O_XfeedLo Link IOCARD_OUT Output 37

    Var 2989 name O_Lftafton Link IOCARD_OUT Output 41
    Var 2990 name O_lftfwdon Link IOCARD_OUT Output 36
    Var 2991 name O_Rgtafton Link IOCARD_OUT Output 35
    Var 2992 name O_rgtfwdon Link IOCARD_OUT Output 47

    Var 2993 name O_LftCtron Link IOCARD_OUT Output 33
    Var 2994 name O_RgtCtron Link IOCARD_OUT Output 34

    Var 2995 name O_Xfeedupvalve Link IOCARD_OUT Output 42
    Var 2996 name O_Xfeedlovalve Link IOCARD_OUT Output 44


    Var 2788 name O_FuelConfig Link IOCARD_OUT Output 43
    // fuel pump switches:

    Var 125 Static Link IOCARD_SW Input 40 Type P // LAftPSw
    Var 120 Static Link IOCARD_SW Input 39 Type P
    Var 118 Static Link IOCARD_SW Input 37 Type P
    Var 121 Static Link IOCARD_SW Input 38 Type P
    Var 127 Static Link IOCARD_SW Input 42 Type P // RAftPSw
    Var 130 Static Link IOCARD_SW Input 41 Type P // RFwdPSw
    Var 131 Static Link IOCARD_SW Input 44 Type P // LCtrPSw
    Var 132 Static Link IOCARD_SW Input 43 Type P // RCtrPSw


    //**********2.16 Wing & Anti-Ice*****************



    Var 716 Static

    {
    &O_WingAIce = TESTBIT v716 0
    &O_LEngAIce = TESTBIT v716 3
    &O_REngAIce = TESTBIT v716 5
    }

    Var 3580 name O_WingAIce Link IOCARD_OUT Output 96
    Var 3581 name O_LEngAIce Link IOCARD_OUT Output 99
    Var 3082 name O_REngAIce Link IOCARD_OUT Output 98


    // Anti Ice Switches

    Var 136 STATIC Link IOCARD_SW Input 008 Type I // WingAIce
    Var 137 STATIC Link IOCARD_SW Input 006 Type I // LEngAIce
    Var 138 STATIC Link IOCARD_SW Input 005 Type I // REngAIce

    //**************************************************************
    // 2.17 Wipers

    Var 139 STATIC Link IOCARD_SW Input 68 Type I // WipersOff
    Var 140 STATIC Link IOCARD_SW Input 67 Type I // WipersSlow
    Var 141 STATIC Link IOCARD_SW Input 66 Type I // WipersFast

    //***************************************************************


    //**********3.1 Cargo Heat*****************

    Var 143, Link IOCARD_SW, Input 33, Type I
    {
    IF V143 = 0
    {
    V144 = 0
    }
    ELSE
    {
    V144 = 1
    }
    }

    Var 144, Link IOCARD_OUT, Output 24

    Var 904, Link IOCARD_SW, Input 34, Type I
    {
    IF V904 = 0
    {
    V905 = 0
    }
    ELSE
    {
    V905 = 1
    }
    }

    Var 905, Link IOCARD_OUT, Output 21

    Var 145 Static Link IOCARD_SW Input 34 Type I
    Var 146 Static Link IOCARD_SW Input 33 Type I

    //**********3.2 Window Heat*****************



    Var 718

    Var 906, Link IOCARD_SW, Input 29, Type I
    {
    IF V906 = 0
    {
    V164 = 0
    }
    ELSE
    {
    V164 = 1
    }
    }

    Var 164, Link IOCARD_OUT, Output 25

    Var 907, Link IOCARD_SW, Input 30, Type I
    {
    IF V907 = 0
    {
    V908 = 0
    }
    ELSE
    {
    V908 = 1
    }
    }

    Var 908, Link IOCARD_OUT, Output 11

    Var 160, Link IOCARD_SW, Input 31, Type I
    {
    IF V160 = 0
    {
    V161 = 0
    }
    ELSE
    {
    V161 = 1
    }
    }

    Var 161, Link IOCARD_OUT, Output 19

    Var 162, Link IOCARD_SW, Input 28, Type I
    {
    IF V162 = 0
    {
    V163 = 0
    }
    ELSE
    {
    V163 = 1
    }
    }

    Var 163, Link IOCARD_OUT, Output 23


    Var 151 Static Link IOCARD_SW Input 29 Type I
    Var 152 Static Link IOCARD_SW Input 30 Type I

    Var 153 Static Link IOCARD_SW Input 31 Type I
    Var 154 Static Link IOCARD_SW Input 28 Type I

    //**********3.5 Passenger Signs*****************



    Var 166 STATIC Link IOCARD_SW Input 107 Type I // SBeltOff
    Var 167 STATIC Link IOCARD_SW Input 106 Type I // SBeltAuto
    Var 168 STATIC Link IOCARD_SW Input 105 Type I // SBeltOn

    Var 170 STATIC Link IOCARD_SW Input 98 Type I // NoSmokOff
    Var 171 STATIC Link IOCARD_SW Input 97 Type I // NoSmokAut
    Var 172 STATIC Link IOCARD_SW Input 96 Type I // NoSmokOn


    //**********2.27 packs switches*****************



    Var 733 Static

    {
    &O_LftPackOff = TESTBIT v733 0
    &O_RgtPackOff = TESTBIT v733 1

    }

    Var 9406 name O_LftPackOff Link IOCARD_OUT Output 13
    Var 9407 name O_RgtPackOff Link IOCARD_OUT Output 12

    Var 186 Static Link IOCARD_SW Input 27 Type I
    Var 190 Static Link IOCARD_SW Input 32 Type I
    Var 191 Static Link IOCARD_SW Input 26 Type I



    Var 736 Static
    {

    &O_LftIslnOn = TESTBIT v736 6
    &O_CtrIslnOn = TESTBIT v736 7
    &O_RgtIslnOn = TESTBIT v736 8
    &O_LftVlvOn = TESTBIT v736 9
    &O_CtrVlvOn = TESTBIT v736 10
    &O_RgtVlvOn = TESTBIT v736 11
    }


    Var 9405 name O_LftIslnOn Link IOCARD_OUT Output 22
    Var 9408 name O_CtrIslnOn Link IOCARD_OUT Output 97
    Var 9409 name O_RgtIslnOn Link IOCARD_OUT Output 14
    Var 9410 name O_LftVlvOn Link IOCARD_OUT Output 17
    Var 9411 name O_CtrVlvOn Link IOCARD_OUT Output 15
    Var 9412 name O_RgtVlvOn Link IOCARD_OUT Output 16

    // isln switches

    Var 240 Static Link IOCARD_SW Input 20 Type P
    Var 241 Static Link IOCARD_SW Input 21 Type P
    Var 242 Static Link IOCARD_SW Input 22 Type P

    // bleed switches:

    Var 243 Static Link IOCARD_SW Input 19 Type P
    Var 244 Static Link IOCARD_SW Input 18 Type P
    Var 245 Static Link IOCARD_SW Input 23 Type P

    Var 222 STATIC Link IOCARD_SW Input 87 Type I // LPackOff
    Var 223 STATIC Link IOCARD_SW Input 85 Type I // LPackAuto
    Var 224 STATIC Link IOCARD_SW Input 86 Type I // LPackN


    Var 228 STATIC Link IOCARD_SW Input 99 Type I // RPackOff
    Var 229 STATIC Link IOCARD_SW Input 101 Type I // RPackAuto
    Var 230 STATIC Link IOCARD_SW Input 102 Type I // RPackN

    //**********2.29 Aircraft and Panel Lighting*****************



    Var 737 STATIC


    // Lights buttons:

    Var 248 Static name FloodLts Link IOCARD_SW Input 0 Type I
    Var 249 Static name OvrrdLts Link IOCARD_SW Input 4 Type I
    Var 255 Static name PosLts Link IOCARD_SW Input 2 Type I
    Var 256 Static name Beacon Link IOCARD_SW Input 11 Type I
    Var 257 Static name WhiteLts Link IOCARD_SW Input 14 Type I
    Var 258 Static name WingLts Link IOCARD_SW Input 9 Type I


    // Lights switches:

    Var 260 Static Link IOCARD_SW Input 1 Type I
    Var 261 Static Link IOCARD_SW Input 7 Type I
    Var 262 Static Link IOCARD_SW Input 16 Type I
    Var 263 Static Link IOCARD_SW Input 3 Type I
    Var 264 Static Link IOCARD_SW Input 13 Type I
    Var 265 Static Link IOCARD_SW Input 25 Type I

    Lekseecon proud support

  4. #4
    2000+ Poster - Never Leaves the Sim kiek's Avatar
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    2,202
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    Hi,
    I had a look at your configuration and I'm a bit surprised...

    First:
    CONFIG_FILE: c:\lekseecon\cockpit767\cockpit767.ssi
    You should not put your files in my lekseecon subfolders. That's not a good idea. They will be overwritten the next time you install a new lekseecon version..
    Put your own SIOC scripts in your own folders..

    Second:
    Do you have a complete overhead working? I see a lot of SIOC scripts... So you must be an expert by now
    But you are not able to add MCP code????

    regards,
    Nico

  5. #5
    25+ Posting Member
    Join Date
    May 2010
    Location
    FRANCE
    Posts
    41
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    Quote Originally Posted by kiek View Post
    Hi,
    I had a look at your configuration and I'm a bit surprised...

    First:
    CONFIG_FILE: c:\lekseecon\cockpit767\cockpit767.ssi
    You should not put your files in my lekseecon subfolders. That's not a good idea. They will be overwritten the next time you install a new lekseecon version..
    Put your own SIOC scripts in your own folders..

    Second:
    Do you have a complete overhead working? I see a lot of SIOC scripts... So you must be an expert by now
    But you are not able to add MCP code????

    regards,
    Nico
    now:CONFIG_FILE=C:\Program Files (x86)\IOCards\SIOC\cockpit767.ssi
    Lol, an expert
    no Kiek you are the bosS ,we are just padawan ( i just read and try to do good job...)( ctrl c-ctrl v)

    when i want to write the display script nothing is running ....
    it is just i want to finish this week, display and rotary ....
    thx for lekseecon software ..
    eric..

  6. #6
    2000+ Poster - Never Leaves the Sim kiek's Avatar
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    2,202
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    start small with just a part of the MCP...

  7. #7
    25+ Posting Member
    Join Date
    May 2010
    Location
    FRANCE
    Posts
    41
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    We reach the end
    have a nice sunday

  8. #8
    25+ Posting Member
    Join Date
    May 2010
    Location
    FRANCE
    Posts
    41
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    good evening kiek
    MCP is soon finished...
    just a small question...
    how to get the - sign with the vs speed when going left for descend please...
    Lekseecon proud support
    regards

  9. #9
    2000+ Poster - Never Leaves the Sim kiek's Avatar
    Join Date
    Jan 2007
    Location
    Netherlands
    Posts
    2,202
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    Hi,

    Have a look in my file lekseecon\mcp767\3.3_MCP_VS.txt for an example...

    You have to write -999998 to the 7-segment digit showing the minus sign.

    Nico

  10. #10
    25+ Posting Member
    Join Date
    May 2010
    Location
    FRANCE
    Posts
    41
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new install, new start

    Thx Nico for help, i will do it tomorrow ...
    good night and thx for all

    ok i need another display card..
    Last edited by Viper90; 04-19-2011 at 05:02 PM. Reason: to give news

Page 1 of 2 12 LastLast

Similar Threads

  1. Radio install in a Cessna 152
    By mcc253 in forum General Aviation (GA) Builder Disccusion
    Replies: 2
    Last Post: 10-07-2010, 03:22 PM
  2. Wideview install????
    By props in forum Computer Hardware Setup
    Replies: 0
    Last Post: 10-08-2009, 01:33 AM
  3. How do i install my lcd screens to my 737 mip?
    By Glenn in forum Where to Start Building a Home Cockpit
    Replies: 1
    Last Post: 05-02-2009, 07:11 AM
  4. Phidgets install
    By SimPilot in forum FS2Phidget Users
    Replies: 14
    Last Post: 05-28-2008, 11:30 AM
  5. FS2Phidget.exe won't run after install
    By Mark in forum FS2Phidget Users
    Replies: 6
    Last Post: 10-06-2006, 08:30 AM