Results 11 to 20 of 20
Thread: Goflight Cold and Dark
-
04-22-2010, 04:53 PM #11
- Join Date
- Oct 2009
- Location
- Juneau, AK
- Posts
- 553
Re: Goflight Cold and Dark
http://juneaucessnasim.blogspot.com
N58243 (virtual)- Low and Slow...
-
04-22-2010, 07:53 PM #12
Re: Goflight Cold and Dark
Do you mean one of the buttons on the GF-166? Mine will display if I touch the COM1/2 button but will turn off if I push it again. Here are a bunch of pics starting when the computer is turned on and XP is up and running. Then when FS9 is starting up and then the menu page. Next is the AC loaded cold and dark. Finally the AC with the battert master, AltMaster, and Avionics all on.
Notice that during FS9 startup and menu the GF-166's are lit as is the MCPPro and the ATC mod.
Computer on:
FS9 Startup:
FS9 Menu:
Started AC cold and dark:
Power on:
Regards,
BrianFS9 & FSX ERJ-145, E-170, E-190, PIC737, Archer, Arrow, GF-MCPPRO, EFIS, 4GF-P8, 4GFT8, 3GF-166, 3GF-RP48, GF-LGT, GF-ATC, GF-TQ6, 3 Projectors, 5 monitors 1 computer
-
04-22-2010, 11:23 PM #13
- Join Date
- Oct 2009
- Location
- Juneau, AK
- Posts
- 553
Re: Goflight Cold and Dark
Great setup, Brian!
Still not working, but I have more specifics of what is happening and my setup.
I am currently using FSX accel, with the default C-172. All Goflight functions are programmed through the GF config software which is v1.93 build 20. Here is a chart of what is going on:
Action taken-Goflight response-Onscreen response
1.FSX started-All GF units are displaying information-N/A
2.Default flight started (cold, dark and unfueled)-All GF units go dark-N/A
3.Master Batt and Avionics turned on- GF Units remain dark-Onscreen stack lights up
4.Push any button on a GF unit-That unit lights up-N/A
5.Turn Off Avionics or Batt switch-GF units remain lit-Onscreen stack goes dark
There is no physical action I can take that will make the GF modules turn off, short of unplugging the USB.
Reloading the default flight, or resetting it does not turn the GF units off.
Here is more info:
GF-166 #1 Com1 left button-Com1/2 right button-Atc popup
GF-166 #2 Com2 left button-nav1/2 right button-adf/xpndr
GF-46 Inst-AP-DME1 and 2
Any thoughts on what people who are successful at this may be doing diferently? I notice Brian is using FS9. Is anyone using it successfully with FSX? Anyone programming functions through another method? i.e FSUIPC?http://juneaucessnasim.blogspot.com
N58243 (virtual)- Low and Slow...
-
04-23-2010, 01:48 AM #14
Re: Goflight Cold and Dark
"Here is more info:
GF-166 #1 Com1 left button-Com1/2 right button-Atc popup
GF-166 #2 Com2 left button-nav1/2 right button-adf/xpndr
GF-46 Inst-AP-DME1 and 2 "
Gf-166 # 2 should be NAV1 in Main avionics function in GFconfig. (maybe you just typed wrong here in the post ??)
Regards
Bjarne
-
04-23-2010, 03:52 PM #15
Re: Goflight Cold and Dark
OK then, I just fired up FSX and I can see what you mean All 3 of my GF-166's and the MCPPro are lit up even though the Battery master is off. Instruments on the monitor are off but not so the GF stuff. I guess I never noticed it before because I turn the battery on fairly soon after the aircraft loads. As a side note I'm still using GF version 183. I never updated to 193 because, If it ain't broke, don't fix it!!
Thanks for the compliment on the sim.
Regards,
BrianFS9 & FSX ERJ-145, E-170, E-190, PIC737, Archer, Arrow, GF-MCPPRO, EFIS, 4GF-P8, 4GFT8, 3GF-166, 3GF-RP48, GF-LGT, GF-ATC, GF-TQ6, 3 Projectors, 5 monitors 1 computer
-
04-23-2010, 08:49 PM #16
- Join Date
- Apr 2007
- Location
- Alberta, Canada
- Posts
- 213
Re: Goflight Cold and Dark
Hi,
I use FS9 and have a few GF modules. I set my PMDG 737 up in a cold and dark start by using the Cessna first and then switching everything off, then changing to the 737. I saved this flight. When I start FS up, and select the flight, the GF modules first light up and then go out once the flight is ready on screen, until I turn on the Battery switch, then the modules come to life. The exception is the GF MCP Pro which stays lit but doesn't show any digits until I turn the battery on. It has always worked this way and I don't know if FSX is different. I think you have to make sure that all the switches are off in the 737 before you save the flight and exit FS. Then when you open FS again, select the flight you saved and it should give you a cold and dark status.
Rob
-
04-24-2010, 12:56 AM #17
- Join Date
- Oct 2009
- Location
- Juneau, AK
- Posts
- 553
Re: Goflight Cold and Dark
So this may be something implemented in fs9 but not fsx...
I have an email in to GF tech support looking for help, but so far it has been 4 days without a response...http://juneaucessnasim.blogspot.com
N58243 (virtual)- Low and Slow...
-
04-30-2010, 05:04 PM #18
- Join Date
- Oct 2009
- Location
- Juneau, AK
- Posts
- 553
Re: Goflight Cold and Dark
Ok friends...I did it!
Not sure how...but I did!
So here is what I did....
1. Downloaded latest FSUIPC
2. Opened up the LUA library file that it installed:
c:/program files/microsoft games/fsx/modules/fsuipc documents/unzip lua library
3. put the lua file called GFdark into the root of the modules folder
4.Started FSX, in FSUIPC buttons and keys, I assigned a key to the lua gfdark command.
Now I can load my default cold and dark flight, push the key assigned to gfdark, and the small program runs to check for Master battery, master avionics, electrical voltage <16v and electrical failures, and does the corresponding action to the GF displays. It was all already in there, but somehow despite hours of webcrawling I could not find anyone who had posted instructions on making it happen.
Was hard headed about asking for help from Mr. Dowson, because I hate being told to RTFM.
Now if I could figure out how to make the LUA GFdark command execute on initialization of FSUIPC without using a keyboard command, I will be a happier man.
Any FSUIPC super-geniuses out there know if that is possible, and if so, how?
BTW, I did RTFM, just did not have the literacy to understand 90% of what I saw, so I hope this makes someone else's life easier...http://juneaucessnasim.blogspot.com
N58243 (virtual)- Low and Slow...
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 DislikesBjarne Horsbøl thanked for this post
-
05-01-2010, 11:15 AM #19
Re: Goflight Cold and Dark
Hello Mongo !
WELL DONE ! You solved your problem yourself...
and I am sure this makes someone else's life easier...
I know the fear of "being told to RTFM." specially if you have RTFM 10 times but have some questions to understand the M.
I use FS9 with FSUIPC and I have no problems with Goflight- cold and dark. So my experience was no help to you..
How did you get the glue to solve the problem ?
I am SURE you will find a solution to "LUA GFdark command execute on initialization of FSUIPC without using a keyboard command"
Thank you on behalf of other FSX/goflight users for posting your solution.
-
11-03-2010, 03:02 PM #20
- Join Date
- Oct 2009
- Location
- Juneau, AK
- Posts
- 553
Re: Goflight Cold and Dark
I had to break down and ask for Pete's help in his support forum. It was a very easy fix. The instructions are quoted below:
"As documented in the Lua documentation (see the FSUIPC documents folder inside your FS Modules folder), the Lua files automatically loaded are ipcInit.lua, which is run right at the beginning of FS, before anything is loaded, and ipcReady.lua which is run when FS is ready to fly. Use the latter. You can either rename your file to ipcReady.lua, or, probably better for future expansion, have an ipcReady.lua file which runs any others you wish, via one statement for each like:
ipc.runlua("GFpower.lua")
Pete"
I renamed my gfDark.lua file in c:/program files/microsoft games/fsx/modules/ to ipcReady.lua . Initially this did not work as I may have filetypes hidden in Windows XP. Dropping the .lua suffix in the name solved it.
Have not set up the file per Pete's recommendations about future expansions, as I did not thoroughly understand how to do what he explained. Will tinker with it for curiousity and report back my results.
Reidhttp://juneaucessnasim.blogspot.com
N58243 (virtual)- Low and Slow...
Similar Threads
-
Cold and dark help.
By Steve A in forum OpenCockpits General DiscussionReplies: 0Last Post: 12-19-2009, 08:39 AM -
Cold and Dark
By Peter Nielsen in forum PMSystemsReplies: 4Last Post: 10-31-2007, 09:01 AM -
Airbus cold and dark
By mmakela in forum PM General Q & AReplies: 0Last Post: 09-12-2007, 02:59 AM -
cold and dark in flight
By rippey in forum PMSystemsReplies: 8Last Post: 05-18-2007, 01:00 PM
Candid connections: Platform for casual relationships Live Women Prime Сasual Dating
Super Сasual Dating - Genuine...