Page 1 of 4 1234 LastLast
Results 1 to 10 of 37
  1. #1
    500+ This must be a daytime job
    Join Date
    Nov 2005
    Location
    rotterdam, the Netherlands, Europe
    Posts
    804
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    update on the motion project.

    I promised to keep you all updated on our first motion sim project, so here are 2 video's we made recently.


    http://www.youtube.com/user/engravit.../1/aVzwChycsVI

    http://www.youtube.com/user/engravit.../0/DEY6ry9YNE4


    The Platform will accomodate a projection dome, full 737 shell, instructors cabin and a balcony.

    Over the next few weeks we will be placing the shell and instructors cabin..


    The sim is being custom build for Simsensation (www.simsensation.nl).

    Simsensation will be using this sim for both training professionals but also for renting to the casual simmer. More information on simsensation on their website: www.simsensation.nl

    Simsensation is located at Lelystad Airport, right next to the Aviodrome Museum, location of the yearly FSweekend Event.

    The 6 DOF platform is manufactured by MOOG.

    Moog is one of the market leaders in the motion industries and its platforms are being used in level-D sims from CAE and FlightSafety International.

    More information on MOOG and their motion solutions can be found here:
    http://www.moog.com/markets/aircraft...ht-simulation/

    some more pictures:

    The shell to be used:




    unloading the platform chassis at our facilities:


    Last edited by dnoize; 02-25-2010 at 04:56 AM.
    www.boeing737ng.com
    ___________________________
    The Dutch 737 Simulator Project

  2. Thanks autocadplease, Joe Cygan, Stijn, vybhav thanked for this post
  3. #2
    Executive Vice President, Administration, MyCockpit, Inc.
    Join Date
    Jun 2009
    Location
    Bangalore
    Posts
    261
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    Stef,

    Many thanks for the update. The project looks awesome and thanks for sharining.

    Hopefully we can see it in FSWeekend in November 2010.
    Regards
    Vybhav


  4. #3
    500+ This must be a daytime job
    Join Date
    Nov 2005
    Location
    rotterdam, the Netherlands, Europe
    Posts
    804
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    short update: shell and instructor cabin fitted.

    Next step: fitting MIP and controls.




  5. Thanks choffmann, Joe Cygan, Matt Olieman thanked for this post
  6. #4
    Executive Vice President, MyCockpit


    Matt Olieman's Avatar
    Join Date
    Oct 2005
    Location
    Ocala, FL USA
    Posts
    2,884
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    Quite impressive. Need that for my cockpit..... Don't I wish Thanks for the video Stef

  7. #5
    Super Moderator
    Join Date
    May 2006
    Location
    Texas
    Posts
    616
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    Stef,
    Great direction your going, don't look back!

    Joe

  8. #6
    300+ Forum Addict



    Join Date
    Mar 2009
    Location
    Body in Netherlands, Hart in the Fairest Cape!
    Posts
    387
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    Darn, . .that looks sweet, ..... but I have a question, how will you do the visuals later. I mean, if you're in a motion simulator the horizon will be fixed and you will move in relation to the horizon, just like in a real plane. When using a flight simulator that is taken care of by the software and you are 'tilted' as it were and the horizon is fixed.

    I have often wondered how that's done.

  9. #7
    500+ This must be a daytime job
    Join Date
    Nov 2005
    Location
    rotterdam, the Netherlands, Europe
    Posts
    804
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    @ Matt & Joe: Thanks guys !
    @ Capetonian: The entire shell will be covered with a projection dome. Projected horizon will be relative to shell position.

    Besides, unlike what people commonly believe, the motion platform of pro sims do not move all the time and they certainly dont simulate the aircrafts physical position in the simulation. Motion is only used to simulate g-forces.

    Most budget and semi pro motion platforms just read the aircrafts position in flightsimulator en put the platform in the same position.

    In a level-D sim this does not happen. For example in a aircraft banking to the left, the platform of a level-d sim will bank to the right ! (picture yourself driving a fast car in a left turn....you are being pushed to the right).

    MOOG the supplier of our platform also supplies CAE and Flightsafety International with the platforms for their level-D sims. Our platform will be using similar software using physical data to simulate g-forces and not just bank the platform accordingly to the aircrafts position in FS.

    Stef

  10. #8
    300+ Forum Addict



    Join Date
    Mar 2009
    Location
    Body in Netherlands, Hart in the Fairest Cape!
    Posts
    387
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    Hoi Stef,

    Thanks for the update and the explanation. I cannot wait to see that thing when it's finished! What an awesome 'toy'.

  11. #9
    500+ This must be a daytime job
    Join Date
    Nov 2005
    Location
    rotterdam, the Netherlands, Europe
    Posts
    804
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    Another update on the motion project....just a few pictures.


    Shell placed on the motion platform, instructors cabin is finished. The sim will take 2 pilots in the shell and 2 people in the instructor cabin. Started building the structure for the projection dome.




    The back of the instructorscabin with the balcony. The balcony will have air stairs.




    Looking in from the back with the 2 Ipeco's + J-rails just fitted. Interiors are partially fitted.





    A view from the front. Sorry for the bad quality, taken with my phone.
    ICS interface system and gauges have been fitted. The ICS interface is modular and eliminates the need for wiring switches, annunciators, etc. Very failsafe this way and the modular system is perfect for maintenance.




    Captains side. Ipeco seat with j-rails fitted. This is the newer electrically adjustable model, an option on the 737. It can be adjusted manually and electrically. Same seats are used on the 747/400.
    Interiors are partially fitted.





    First Officers Office:




    Close up on the interior trim






    Panels, glareshield and glarewings fitted.





    Next on the list:

    • Finishing Interiors

    • fitting screens

    • testing interfaces and computers

    • fitting airconditioning

    • finishing instructors station

    • TESTFLYING !


    Stef

  12. Thanks Matt Olieman, vybhav thanked for this post
  13. #10
    300+ Forum Addict



    Join Date
    Mar 2009
    Location
    Body in Netherlands, Hart in the Fairest Cape!
    Posts
    387
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: update on the motion project.

    Wow Stef , .. that thing is looking so awesome ..... DAMN!!!

    Next time Gert visits I'm going to hide in his car boot!

Page 1 of 4 1234 LastLast

Similar Threads

  1. Update in my 737-700 project
    By Carlos Corona in forum My Cockpit Update
    Replies: 15
    Last Post: 06-14-2013, 01:56 AM
  2. CDU Project Update
    By Boeing 747 Flyer in forum My Cockpit Update
    Replies: 1
    Last Post: 06-08-2010, 10:51 AM
  3. NEW Update on my project!!
    By Fuglsang in forum My Cockpit Update
    Replies: 3
    Last Post: 09-11-2008, 02:20 PM
  4. Update to my motion platform - phase 1 complete!
    By louisgr in forum My Cockpit Update
    Replies: 3
    Last Post: 08-01-2008, 10:33 PM
  5. My motion platform project video
    By Dutchboy in forum Cockpit Parts and Motion Platforms
    Replies: 6
    Last Post: 06-24-2007, 06:34 PM