bendix com box - help needed

[Jylhami]

Steve,

If you need to have only 1 or 2 pcb:s maybe i can made them to you.
If you need 2-sided, then you have to solder trough holes by yourself.

Other than that i can manage the cut-out holes and outlins for you...

[Steve1970]

Jylhami

Thanks for the offer, as you can see the PCB layout is quite busy due to the fact that I have 20x 7-Segment LEDs for COM/NAV and STBYs

I haven't finished routing the encoders yet either. Will definately need to be double sided.

Thanks

Steve

[Jylhami]

Hmm,

Spam bot ?

Edit:deleted by moderators...

[Steve1970]

Hmm,

Spam bot ?

Edit:deleted by moderators...

? Did I miss something ?

[Jylhami]

Yes, if you did't see that post just before mine.

An quote from your post with nothing more than some links to suspicious loan offering...

Seems that the moderatos have take it away

By the way what are the measures for your NAV/COM outline ?
Seems that you have found really small 7-segmets to use if the panel width is 160mm ?

[Steve1970]

Hi

The faceplate will measure about 160mm wide, but the pcb is wider to accommodate the terminal blocks to take the wiring away. The PCB will not be visible as it will sit behind the MIP.

Thats my plan anyway.

The 7-segment LEDs are standard ones from Opencockpits online shop.

I now have figured out the SIOC coding to display all the frequencies and done some further testing. I will need 2 display cards and a card from Leo Bodnar.

I will use Leo's card for mapping the encoders and the push buttons as the Opencockpits master card does not support the Elma E37s.

Steve.

[Steve1970]

Hi
Just an update, almost complete .....

[RojanTrojan]

Looking really good Steve.

Cheers

Rhydian

[pilotwannabe]

Any update on the radio project Steve? It's looking good in your shots so far.
Any plans for publishing schematics/layouts?
Best wishes

[Kerbo]

That looks great!