Auto throttle : N1 overspeeding after takeoff, unable to stay under 250 with A/T

[Melnato]

Thanks Jonathan!

My TOGA button is actually lighting up the N1...so something is not right here too...new mission for the weekend

Nat

[Melnato]

HELP!!!!!!!!!

Well I re-assigned my TOGA button from PM MPC THR Ref to FSUIPC A/T TOGA...and nothing.

With the Arianne flight model, nothing happens at all.
With the default FSX 737, the AT "seems" to engage TOGA, but its not
showing TOGA on the PFD Display.

Also tried setting TOGA button directly within FSX...same thing...nothing.

What are others using for TOGA button assignment?(FSUIPC or PM offsets?)

Nat

[mauriceb]

What are others using for TOGA button assignment?(FSUIPC or PM offsets?)

Nat

Hi Nat,

My sim is out of commission now, but I used PM offsets (with Phidgets) for the TOGA assignment. I know that it worked great for a while, but I seem to recall that with some new PM release, TOGA may not have appeared on the PFD although TOGA was in fat active. But I could be totally mistaken here about TOGA not showing up on the PFD... it's only a very vague recollection and I wouldn't trust it at all

Maurice

[JonathanRichardson]

04F2 / 2 MCP/FCU Throughpass (See MCPcodes at the end) (Read/Write) Use 121 for TOGA (without N1) DisableRemoteMCP must be set to OFF in the INI file for this to work.

The toga will work correctly if you send the 121 command as above.

Regards
Jonathan Richardson

[Melnato]

Thank you Jonathan!!!!!!!

Just when you think you're all over it...you learn something new.

Real TOGA at last!

Nat

[comma]

Hi Jonatan,

Thank you for clearing this up.
May i have one question and one remark ?

Question :
I totally do not understand
" 04F2 / 2 MCP/FCU Throughpass (See MCPcodes at the end) (Read/Write) Use 121 for TOGA (without N1) DisableRemoteMCP must be set to OFF in the INI file for this to work. "
Im mean what to do, where and how to achieve this.

Remark :
- Do not get me wrong, I find Project Magenta a very good product, but i definitly do not understand why what you are talking about above for sample is not explained in a manual updated peridocly along with releases.

So anyway, finally, should i use the A/T TOGA mapping i see in FSUIPC or not ? I just don't get it sorry...

[JonathanRichardson]

>- Do not get me wrong, I find Project Magenta a very good product, but i definitly do not understand why what you are talking about above for sample is not explained in a manual updated peridocly along with releases.

It is documented. These type of things are not documented in the user manual, that is just simply not possible. We would be uploading and changing all week long. All these type of things are listed in changes.txt or the ini file itself.

>So anyway, finally, should i use the A/T TOGA mapping i see in FSUIPC or not ? I just don't get it sorry...[/QUOTE]

You can use FSUIPC if that is what you are connecting to (?) please refer to FSUIPC docs for that - you can send specific values if that is what you want to do. I really have no idea of your set-up or how you are trying to achieve things to be honest - best e-mail support, I don't monitor this forum all the time.

Regards
Jonathan Richardson