Results 11 to 20 of 30
Thread: plexi glass qestion
-
04-14-2009, 06:52 PM #11
maybe you can try this company:
http://www.schaeffer-ag.de/en/frontp...materials.html
-
04-14-2009, 09:08 PM #12
I fit a small square file to my jigsaw for cutting square apertures after a pilot hole has been drilled.
Also it helps if you "back off" your drill bits for plexiglass. Backing off means grinding back the two sharp cutting edges of the drill bit a little, grind the edges off so the cutting face is 90 degrees to the material. This stops the drill bit digging in and breaking through the other side untidily. The same process is good for drilling soft metals such as brass and cast iron too. Don't push hard on the drill, go slowly and let the drill bit cut the material away slowly. Lube the plexi with a spray lube such as CRC or WDF to keep the plastic cool when machining, it also stops your jigsaw blades and files clogging up.
Regards, GwynLast edited by Westozy; 04-14-2009 at 09:20 PM.
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
Post Thanks / Like - 3 Thanks, 0 Likes, 0 Dislikes
-
04-15-2009, 04:39 PM #13
thanks guys your info is very helpful sorry to say that my island has no laser cuting only found a guy that makes advertisment stikers for sighns and cars
i have asked one of my supplyers for a cnc router and he will let me know after easter so i will let you know what i find how do you backlight a metal panel???i thought of just painting and finding stickers and leave backlighting
but then i think if your going to do it than do it right!!!thanks
-
04-16-2009, 02:02 AM #14
- Join Date
- Feb 2005
- Location
- Hamburg / Germany
- Posts
- 174
http://www.rayjetlaser.com
The smallest Laser engraving maschine plug and play!
Best regards
JanVisit my project on Facebook and become a fan www.facebook.de/homecockpit
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikesspiro thanked for this post
-
04-16-2009, 03:26 PM #15
thanks jan for the site that is a butiful machein dose any one know how much it costs i sent a message but i cant wait!!!!i think it will cost alot of mony???
-
04-16-2009, 04:12 PM #16
Correct me if I am wrong, but a laser engraver can only engrave things - it cannot cut this out like a CNC machine can.
Some commercial CNC routers:
http://www.probotix.com/
http://www.k2cnc.com/
http://www.nextwaveautomation.com/CNCShark.aspxGrant D.
Nelson,B.C. Canada
Win7 32bit, FSX, PM Boeing, TH2GO, GEX, VoxATC
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikesspiro thanked for this post
-
04-16-2009, 04:59 PM #17
thanks auto cad but know i am mixed upi thoght that a cnc router and a lazer engraver,cutter dont they do the same job??in my case it is to make panels from plexiglass so i can cut all holes neded with acurese 100% and than once i paint them to be abel to engrave on them for backlighting so dose the jetstrem do the jobor do i need a router cnc????
-
04-16-2009, 05:47 PM #18
- Join Date
- Jan 2009
- Location
- Derby, UK
- Posts
- 128
This info says that it will both engrave and cut acrylic - Just a question of what power setting you use.
The data suggests that you might need to buy the optional cutting table as well
The info does not state what the maximum depth of cut is - But I assume that you just make multiple passes until you get through ? - Any experts here ?
I would be interested to know how much it costs - I'm guessing about 1500 Euro
Cheers,
Rob
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikesspiro thanked for this post
-
04-16-2009, 06:37 PM #19
A laser cutting machine will cut things, I was only cautioning you on something called an "engraver". A laser machine will be much more accurate than a CNC router, but I expect the cost to be much higher.
A laser cutting machine at work: http://www.youtube.com/watch?v=o4n6qz7BBgQ
A K2 CNC router ar work: http://www.youtube.com/watch?v=zYpkp...eature=related
A similar CNC that I built at work: http://www.youtube.com/watch?v=SpxG_ByGj90Grant D.
Nelson,B.C. Canada
Win7 32bit, FSX, PM Boeing, TH2GO, GEX, VoxATC
-
04-17-2009, 03:02 AM #20
thaks for the videosi get the idea,rob i have sent a email to find out the price so will let every one know when they reply , i am also waiting on a supplyer of mine here in greece for afer ester to give me a price when he dose i will ask what make and model it is and also let you guys know because i dont know much of these cnc so somone could tell me if it is a worth it, the only good thing is that if i get it from him he will geve me 20 to 30% off the retail price witch is good i have bought all my tool and neary every thing i have in my automotive helectro garage so he will do somthing beter thanks alot guys and i will reply onece i have news
Similar Threads
-
Extruded Acrylic/Plexi : BEWARE
By Hessel Oosten in forum Westozy's Mechanical EngineeringReplies: 12Last Post: 12-04-2009, 02:04 PM -
737 Windows - with or without (plexi)glass
By Tony in forum General Builder Questions All Aircraft TypesReplies: 5Last Post: 10-07-2009, 06:04 AM -
Any good Plexi cutters / painters fancy a commision?
By David Rogers in forum General Builder Questions All Aircraft TypesReplies: 0Last Post: 11-28-2007, 01:30 PM
Candid connections: Platform for casual relationships Live Women Prime Š”asual Dating
Super Š”asual Dating - Genuine...