Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    2,887
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Universal Joystick Controller BU0836X

    I finally ordered this card a few minutes ago. I hope it doesn't take forever to receive.

    I also ordered a couple of rotary encoders that will be used for the HSI heading and course selectors. I'm not sure how I'm going to go about mounting them yet, whether under the HSI bezel in a slim box-like panel or possibly in the fire rack under the glareshield, maybe even in a custom panel installed into the RT box ahead of the throttles.

    The new card is taking over duties currently handled by the Hagstrom LP24 for the overhead.

    Is there anything I need to know about this card other than what comes with it?
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  2. #2
    25+ Posting Member
    Join Date
    Sep 2007
    Location
    UK
    Posts
    31
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    I think Ian Sissons is the man to give you the low down on this. Hopefully he will chip in when he is next on. Mean while check out his site at ......
    http://www.737ng.co.uk/overhead.htm

    Andy
    Andy

  3. #3
    2000+ Poster - Never Leaves the Sim Trevor Hale's Avatar
    Join Date
    Nov 2005
    Location
    Ontario, Canada
    Posts
    2,223
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Mike, I ordered 2 of them, and received them within 2 weeks. They have to be the easiest cards to setup. Plug em in, goto fsupic, and your done.

    I love them and will be ordering more of them.


    Trev
    ________________________
    Trevor Hale

  4. #4
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    2,887
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Sounds great!

    I'm removing the matrix setup on the LP24. I will still use it for some functions in the direct mode, but that matrix mode is a mess with diodes everywhere and not a very clean installation.

    Can't wait for the new card. Especially for the rotary encoder inputs for the HSI controls.
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  5. #5
    75+ Posting Member
    Join Date
    Oct 2008
    Location
    ontario
    Posts
    95
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    good for a GPS?

    I am thinking of doing a GPS for my GA style panel and wondering if this is a good option. Trevor, how was delivery to Canada? Did you get hit with customs fees? I like the minimal soldering approach and no diodes aspects.

    Thanks, Dave

  6. #6
    500+ This must be a daytime job ian@737ng.co.uk's Avatar
    Join Date
    Jan 2006
    Location
    Oswestry, Shropshire
    Posts
    609
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    BU0836X Controller

    hi micheal.....
    trevor is absolutely right. you are going to love this card. it's so easy to use. i am using 4 of these, you just plug them in and 'way to go'. connect pots, encoders and any kind of switch you can think of and the end result is only as good as your imagination.
    thru FSUIPC, you can add axes, send keys, use the mouse macro's and even manipulate offsets and their parameters.
    now all we need is an output card this easy to use.......why make life compicated?
    anything specific you need to know, please feel free to ask.
    happy new year captain..... ian
    Mr. Ian. P. Sissons is hereby recognised as an Honorary Flight Sim Captain following his passing in February 2016. This is in recognition for his commitment to Flight Simulation.

    www.mycockpit.org Featured Builder August 2008 www.737ng.co.uk
    FS9/PROSIM737/CPFLIGHT/Lots of BU0836X's and a Beer Fridge

  7. #7
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    2,887
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Sounds like a winner. Thanks Ian!
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  8. #8
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    2,887
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Got the card today. Wow that was fast. I may or may not start on the overhead today. Definately tommorow though.

    I can't wait to get that Hagstrom board out of there and start using this one.
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  9. #9
    2000+ Poster - Never Leaves the Sim Trevor Hale's Avatar
    Join Date
    Nov 2005
    Location
    Ontario, Canada
    Posts
    2,223
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by colt45 View Post
    I am thinking of doing a GPS for my GA style panel and wondering if this is a good option. Trevor, how was delivery to Canada? Did you get hit with customs fees? I like the minimal soldering approach and no diodes aspects.

    Thanks, Dave
    Actually Dave, Didn't get dinged at all by customs. i ordered 2 and they arrived in a sealed bubble envelope at the post office.

    No import duties at all.

    Trev
    ________________________
    Trevor Hale

  10. #10
    75+ Posting Member
    Join Date
    Oct 2008
    Location
    ontario
    Posts
    95
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thanks Trevor. I may just go ahead and order one to force me to get on with something. I am thinking of starting one of the following "projects"

    i) the GPS which I am still hunting for a LCD screen, input board and all the accessories (this definitely will be most taxing on my skill levels)
    ii) a 24" widescreen and FS Panel Studio to develop a MIP for a Cessna behind a panel with cut outs
    iii) a touchscreen to use as a GPS instead of project i)
    iv) a custom designed "desk" I have been designing with Sketch Up over the holidays
    v) save my cash for a TH2Go and monitors

    So many choices, so little disposable income.

    Cheers, Dave

Page 1 of 2 12 LastLast

Similar Threads

  1. 10-bit or 12-bit joystick controller
    By matta757 in forum I/O Interfacing and Hardware
    Replies: 5
    Last Post: 11-29-2009, 01:51 PM
  2. Need some help on the Leo Bodnar Joystick Controller
    By CessnaGuy in forum Where to Start Building a Home Cockpit
    Replies: 20
    Last Post: 01-25-2009, 06:26 AM
  3. SIOC vs SIM-Board Universal Controller
    By Sunday in forum I/O Interfacing Hardware and Software
    Replies: 5
    Last Post: 04-14-2008, 09:46 PM
  4. Simple Joystick Controller?
    By UCONN88 in forum I/O Interfacing Hardware and Software
    Replies: 5
    Last Post: 04-09-2007, 01:43 PM