Results 1 to 9 of 9
  1. #1
    25+ Posting Member jonnydaz53's Avatar
    Join Date
    Aug 2008
    Location
    south east , uk
    Posts
    73
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    leds without resistors ???

    hi guys and gals i am still trying to find the best way to backlight my pit. i have recentley come across a guy at

    http://translate.google.co.uk/transl...GB288%26sa%3DG

    and he uses a 12v atx power supply which supplies 4 x 3v white 20000mcd which he wires in series without a resistor not if they are 3/5/8mm leds but he uses 160 of them ! and the pit seems nice.

    I was thinking of copying his layout ...

    any thoughts ???

    thanks in advance

    john d

  2. #2
    500+ This must be a daytime job
    Join Date
    Nov 2005
    Location
    rotterdam, the Netherlands, Europe
    Posts
    804
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    he doesnt have them to 12V directly but uses this regulator, which can be found on his homepage too:



    Stef
    www.boeing737ng.com
    ___________________________
    The Dutch 737 Simulator Project

  3. #3
    25+ Posting Member jonnydaz53's Avatar
    Join Date
    Aug 2008
    Location
    south east , uk
    Posts
    73
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    any ideas regarding led specs?

    thanks

    john d

  4. #4
    300+ Forum Addict


    brianwilliamson's Avatar
    Join Date
    Oct 2005
    Location
    Gold Coast-AUSTRALIA
    Posts
    455
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    That is not the correct way to connect up the leds. They must be connected in Parallel.
    The specs for the leds all vary . When you buy your leds look at the specs, they will tell you the maximum voltage. That is the maximum you can apply before they go POOF !! Do not worry about the current and make sure all leds are the same and you will have no trouble. Buy all you leds at once will ensure you have the same ones.
    .............Brian W.

  5. Thanks jonnydaz53 thanked for this post
  6. #5
    75+ Posting Member TasKiNG's Avatar
    Join Date
    Jul 2008
    Location
    Derby, England
    Posts
    109
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    you can connect them up in series or parallel but you must be careful not to over drive them, so ensuring that each one has the correct voltage across it / current through it is esential.
    Have a look at this article, It is an excellent article on how to connect leds:-

    http://www.theledlight.com/ledcircuits.html

    Cheers

  7. Thanks jonnydaz53 thanked for this post
  8. #6
    300+ Forum Addict


    brianwilliamson's Avatar
    Join Date
    Oct 2005
    Location
    Gold Coast-AUSTRALIA
    Posts
    455
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    I am sorry for repeating myself, but only connect up your leds in parallel.
    There is a very good reason for this, that is that if you blow one led for a start you lose the lot !!
    The other reason is that you may need to connect 100 leds in your overhead for example, and the only way you can do that is the same way that you have your house wired.......in parallel.
    Hope this explains things a little more clearly.
    .................Brian W.

  9. #7
    75+ Posting Member TasKiNG's Avatar
    Join Date
    Jul 2008
    Location
    Derby, England
    Posts
    109
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Brian,

    I agree that it is best practice to connect LEDSs in parallel for the reasons you have mentioned but it is incorrect to say that they must be connected in parallel hence why I have linked to the article that shows 3 methods of powering leds.

    Cheers

  10. #8
    75+ Posting Member


    chrisdanker's Avatar
    Join Date
    Dec 2006
    Location
    Melbourne, AUSTRALIA
    Posts
    92
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Gents,

    Anyone ever considered wiring up the backlighting with the LED strips as seen in this link:

    http://www.besthongkong.com/index.php?cPath=21_76

    Could be an easy option to avoid unnecessary soldering work....

    Regards,
    Chris

    Chris Danker
    Brisbane, AUSTRALIA

  11. Thanks W9XE/Project777 thanked for this post
  12. #9
    300+ Forum Addict mpl330's Avatar
    Join Date
    Mar 2007
    Location
    Yorkshire - UK
    Posts
    481
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Chris,

    I've used some LED strips for back lighting (as well as cold cathode tubes and single LED's) and they are quite good. They use 12v direct and come in strips of 12 which you can break up into 4 lots of 3 LEDs and have built in resistors - I have even managed to short a block out and it only burnt out 1 LED leaving the other 2 in the block intact ( was holding the strip in my soldering "grip" and shorted the +ve and -ve strips)
    I am using the cold cathode tubes for my Ped and OH backlighting and the "Background" for the MIP, the LED strips for the backlighting of the FMC, the lower MIP swicthes & AFDS Flood and LED's for the MIP backlighting.
    The LED's have been the most disappointing for me as I have some "hot spots" and they do not distribute the light so evenly - oh well version 2 may improve that

    Cheers
    Mike

Similar Threads

  1. BU0836X and LEDS
    By NCW in forum General Builder Questions All Aircraft Types
    Replies: 6
    Last Post: 08-18-2011, 05:28 AM
  2. Leds
    By B763 in forum General Builder Questions All Aircraft Types
    Replies: 2
    Last Post: 06-30-2010, 06:22 PM
  3. LEDs too dim?
    By HondaCop in forum General Builder Questions All Aircraft Types
    Replies: 18
    Last Post: 09-10-2009, 07:26 AM
  4. Advice on LEDs and resistors
    By NicD in forum Computer Hardware Setup
    Replies: 8
    Last Post: 01-08-2007, 07:00 PM