Results 1 to 3 of 3
  1. #1
    500+ This must be a daytime job ian@737ng.co.uk's Avatar
    Join Date
    Jan 2006
    Location
    Oswestry, Shropshire
    Posts
    677
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    CPFlight Do It Again

    hi guys......
    i've just been in conversation with paolo at CPFlight and he tells me that the 100% scale MCPPRO will soon be compatible with the PMDG 737NG and 747 aircraft.
    it appears that CPFlight and PMDG have reached an agreement over access to other things as well. see http://www.flightsimlabs.com/Interfa...ProFS2004.aspx
    it appears that we are going to have access to aircraft systems that were usually only ever available thru PM. i'm delighted that we can now bring on board the 6 packs ))
    and there's more....
    paolo tells me that this driver will be available late september..... so welcome to a new era ))
    regards from wales ..... ian
    Mr. Ian. P. Sissons is hereby recognised as an Honorary Flight Sim Captain following his passing in February 2016. This is in recognition for his commitment to Flight Simulation.

    www.mycockpit.org Featured Builder August 2008 www.737ng.co.uk
    FS9/PROSIM737/CPFLIGHT/Lots of BU0836X's and a Beer Fridge

  2. Thanks Westozy thanked for this post
  3. #2
    500+ This must be a daytime job
    Join Date
    Nov 2005
    Location
    rotterdam, the Netherlands, Europe
    Posts
    898
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    dont forget to mention Lefteris who made it all possible.

    and the good news doesnt end here !

    Not only will it work with the MCP PRO, but it will also work with the scaled down usb and rs232 versions !

    look here for more info:

    http://www.flightsimlabs.com/Forums/...c/Default.aspx

    Alot of great things to expect in the future !

    Stef
    www.boeing737ng.com
    ___________________________
    The Dutch 737 Simulator Project

  4. #3
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,487
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    JOY, JOY, JOY!

    I had given up on the possibility of PMDG ever recognising the cockpit builder as a valid market. I have had countless emails to PMDG ignored even when signing off as a CP magazine writer. Well done to CP Flight for getting through to these people, I can't wait for the improvements! My CPFlight/PMDG set up eagerly awaits...

    Cheers, Stef, Lefteris & Mike.

    Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

Similar Threads

  1. CPFlight RS 232 to USB
    By mascot in forum Computer Hardware Setup
    Replies: 3
    Last Post: 11-20-2009, 01:55 PM
  2. CPflight MIP & FDS AN1
    By indyana1 in forum General Builder Questions All Aircraft Types
    Replies: 2
    Last Post: 09-02-2008, 05:36 PM
  3. Thanks to PM & CPFlight
    By JWS in forum PM General Q & A
    Replies: 4
    Last Post: 04-15-2008, 03:38 PM
  4. CPFlight MCP - Need help
    By SAS541 in forum I/O Interfacing Hardware and Software
    Replies: 0
    Last Post: 02-19-2008, 01:49 PM