Thread: USBout card and iocard.exe
07-03-2008, 12:34 PM #1
- Join Date
- Nov 2005
- Helsinki - Finland
USBout card and iocard.exe
Hello, has anyone tried to use USBout card with
a iocard.exe program? I wish to use the older program
because I finally figured out how to use it.
07-05-2008, 10:17 AM #2
- Join Date
- Apr 2007
- Lafayette, LA USA
I don't have any of the new outputs cards. However, I don't see why it shouldn't work. You would address the output just like an input from the master card.
I think the latest version of the software is 3.5. Make sure you get it. I noticed there are many more "undocumented" features on the newer software.John
ASUS P5Q SE/R
Intel Q9550 O/C to 3.4 GHz
4 GB 1066 DDR2 RAM
300 GB WD 10,000 RPM Raptor SATA Drive
GeForce 8800 GT 512 KB RAM
Matrox TH2Go with three 19" Sumsung 940 BX
IR Track 4
07-05-2008, 01:56 PM #3
I have the USB outputs card in use with SIOC. I don't think it will work together with the basic IOcard.exe software because it is seen as a separate USB device next to the USB expansion card. You have to use DEVICE n Output x in oder to control an output..
But that is another good reason to jump over to SIOC, much easier and a lot more powerful!
By Wendy in forum I/O Interfacing and HardwareReplies: 52Last Post: 12-04-2010, 09:49 AM
By oliver_mpt in forum I/O Interfacing Hardware and SoftwareReplies: 6Last Post: 12-19-2008, 12:46 PM
By excalibur67 in forum PMSystemsReplies: 10Last Post: 03-12-2007, 12:26 PM
By Jouni in forum I/O Interfacing Hardware and SoftwareReplies: 3Last Post: 10-15-2006, 08:10 AM