Results 11 to 20 of 35
Thread: Dual yokes completed
-
05-03-2008, 11:26 AM #11
Thanks
I found a somewhat local supplier as well as a local tractor supply (Farm and Fleet) that carries them. I will be making a trip tonight!
Also found a pair of yokes on Ebay I won for $30.00. They are EADS Sokata yokes but should work fine.
I will send some pictures once finished.
Thanks again!
-
05-04-2008, 08:23 AM #12
Thanks Dieter,
I'll try to understand.
Ken.
-
05-04-2008, 09:18 AM #13Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
05-04-2008, 10:56 AM #14
- Join Date
- Nov 2005
- Location
- Vancouver BC Canada
- Posts
- 523
Ken,
As you know Im not a Boeing guy but Dang Sir you nailed that better than any other design I ever saw before in all my years in this hobby. Great job! Just wondering how are you managing the pitch a Potentiometer I figure?
Tim
A340
-
05-04-2008, 11:43 AM #15
Thanks Tim. I noticed after coming up with this design that I found another builder with the same idea of using drawer slides. He was building a Baron B58 but using all metal construction (he was obviously an engineer of some sort). So these ideas must be out in the ether waiting to be plucked!
Yes both pitch and roll are using pots. I've only today completed both mechanisms along with some aileron stops so the yokes don't spin out of control. New pics will be added to the photo section soon. Once again I stress; I cannot describe the smooth but slightly dampened feel of these yokes. I went flying last week in a C172 and mine feels so much better
Ken.
-
05-04-2008, 01:31 PM #16
Dieter,
In your drawing, that only puts angled tension on the yoke shaft from what I see. Is that how you had meant it? Perhaps I'm not reading it correctly.God's in command, I'm just the Pilot.
http://www.geocities.com/andytulenko/
-
05-04-2008, 03:14 PM #17
- Join Date
- Nov 2005
- Location
- Vancouver BC Canada
- Posts
- 523
Damn you guys are smart,
Like they say if the girls dont find ya ya Handsome they can sure find ya handy lol it just so happens they find us airbus guys both but hey handy is good too Nah jjking I go to guys like you to ge my stuff made like that Keep up awesome work.
Tim
A340
-
05-05-2008, 02:34 AM #18
Ok, I see what you mean. I have a similar idea on that but its a bit more complex. Mine has the advantage of being as flat as possible.
I'll re-draw it and post it here.God's in command, I'm just the Pilot.
http://www.geocities.com/andytulenko/
-
05-05-2008, 03:32 PM #19
- Join Date
- Mar 2007
- Location
- South Africa
- Posts
- 38
Dual yokes completed
Hi Ken
I'm still not sure if I understand how the yokes work. I am a daily visitor to your webpage. I haved looked at all the drawings and read everything on your dual yoke setup.As I can see you are using pillow block bearings, right.If you push the yoke forward or move them backward will the shaft that goes through the bearings not slide through causing the piece of wood where they mounted on just to stand still and have no effect on the other yoke? Sorry for bothering you with this question, hope you guys can help me understand.
Thanks
Ralton
-
05-06-2008, 03:03 AM #20
That's fine Ralton,
It is often difficult to explain all details with static images and text so I'll try to give you more detail.
The two yoke shafts are locked into the bearings with grub screws so the shaft only rotates in the lateral plane (aileron movement). The two yoke shafts and bearings are mounted onto a base timber section (white melamine) which moves back and forward as one when you push and pull the yokes for pitch (elevator movement). This base section is mounted on two heavy duty drawer slides to provide this coordinated movement. Springs then provide elevator centering.
Think of it as a large desk drawer with your two yokes attached to the front, when you push and pull the drawer the yokes move in and out. Mine of course is much more fantastic and marvelous than this
I hope that explains adequately.
Ken.
Similar Threads
-
Double set with CH yokes&pedals causes yokes to spike
By MortenHa in forum General Builder Questions All Aircraft TypesReplies: 3Last Post: 01-29-2010, 12:44 PM -
Dual Saitek yokes?
By shaneb in forum General Builder Questions All Aircraft TypesReplies: 13Last Post: 12-20-2008, 12:01 PM -
Dual rudder pedals completed
By Kennair in forum My Cockpit UpdateReplies: 15Last Post: 04-25-2008, 06:38 AM -
FSUIPC/ Dual CH Yokes
By Tomlin in forum General Builder Questions All Aircraft TypesReplies: 8Last Post: 12-10-2007, 06:23 AM
Candid connections: Platform for casual relationships Live Women Prime Сasual Dating
Super Сasual Dating - Genuine...