Sol7 (ImmersaView) Commitment to supporting this community

[voucher76]

I am wondering whats the most Field of view you can get with the SOL7 software and 1 projector.
My budget will only stretch to one budget projector.

Regards

Rhys

Somebody correct me if I'm wrong, but SOL7 will NOT increase your FOV, it will "only" correct the distortion that will occur, when projecting onto a curved screen.

Best regards

[Matt Olieman]

Somebody correct me if I'm wrong, but SOL7 will NOT increase your FOV, it will "only" correct the distortion that will occur, when projecting onto a curved screen.

Best regards

You're correct.

Matt Olieman

[nosecone]

Thanks for clearing that up for me guys

Regards

Rhys

[pdg_737]

Hi all,

If you want to see how Sol 7 is performing in my home cockpit, take a view in the photo gallery. You can find pictures in the members section at PDG_737. Album is called: building a fllightdeck 737. Pictures no 9, 10 and 30 show the setup and the results.

I have a 7.5 ft curved screen (aluminium and cheap foamboard) and a wide throw projector at a distance of 7 ft from center screen.

PDG_737

[Jackpilot]

Looks really good.
What are the specs of your projector
Jack

[Melnato]

bump...sorry


Does anyone have Sol7 running on a 64bit operating system(XP, Vista, W7)?

Nat

[pdg_737]

Specs projector: DLP, native 1078x768, 2500 ansi lumens, contrast 1:2500 and most important: a throww ratio of 0.6 : 1. So for a 10 ft wide image you need 6 ft distance between projector and screen. Perfect for a small space.
More details on the optoma website under EX525ST.

PDG_737

[Efe Cem Elci]

We have decided to go with ImmersaView's Sol7 for visuals over three projectors for the sim.

[Photon]

I have just found out that our local Police Air Wing are using Sol7 to project onto a 40 foot (wide?) screen for their training purposes. No other info and definitely no pictures allowed at this stage. Mate of mine and BIG sim builder saw it in action.

Peter.

[hyway]

Hi Guys,
I had a meeting yesterday in Sydney with Andy and Alex from Immersaview the makers of SOL7.
They were installing a 180deg setup on a commercial simulator at a flying school, I was very impressed with the whole SOL7 concept. and ordered the Software on the spot.
This is such a great deal, that I am sure it will not last. This software is a massive discount on the comercial product that these guys sell, so if you want it or are thinking of getting, I would do it it now.
I will be installing a 3 projector setup on my sim in the next 6 months (very hard with full motion) using the SOL7 software.
As I said guys, "if it looks to good to be true" go and get it now, so we can all support Immersaview to keep developing this great software for the Homebuilders.