Results 1 to 10 of 32
-
09-06-2007, 06:06 PM #1
- Join Date
- Jun 2007
- Location
- Alberta, Canada
- Posts
- 45
Motion Control Software Open Source
After reading various posts from Jim_NZ, IanH1960, Wannabeaflyer, and others who are creating motion software to connect FSX to 2-DOF and 3-DOF platforms - I'm wondering if there are other people willing to start an open source project to create FSX motion control software with SimConnect and C#?
I have done quite a bit of the base C# code already as can be seen here: www.simulatormotion.com
Right now I am converting it over to use the KT-5198a motor controller via serial port (thanks Jim!) This time it will also have motor speed and simulator position to work with.
http://www.oceancontrols.com.au/moto...ontrollers.htm
Thoughts?
-
09-07-2007, 04:38 AM #2
- Join Date
- Apr 2007
- Location
- india
- Posts
- 59
Are you talking about developers who can contribute to your project ?
-
09-07-2007, 06:48 AM #3
Great idea !!!!
Dutchboy ... great idea.
This idea has got to be one of the best idea postings on mycockpit.org.
Sure beats the problem of everyone floundering along, doing "their own thing".
Fantastic idea !!!!
Who said good things come out of Dutchland ????
Jim NZwww.jimspage.co.nz/intro.htm
All this and Liz still loves me ! !
-
09-07-2007, 08:13 AM #4
- Join Date
- May 2006
- Location
- london england
- Posts
- 177
Gonna second that motion LOL:-0 great idea
Hi Dutchboy its safe to say from my point of view you hit the nail on the head with this suggestion. Like most i suppose i have great plans for my Humble project and even though its getting bigger by the minute its the challange that pushes my buttons
so not underestimating the task at hand any help in getting my code started cant be a bad thing, Just worked my way through a tutorial By a Guys website " Notasenator " he has a Fab tutorial about starting simconnect so makinh so progress cos now i can begin to try to import data from FSX and will be making an API to see that data live as my first step, I'll then do the same with My K8055 and K5198 Motor controllers before i start to knit them togather as one package. Have a small problem with my K5198 Controller Card and am hoping the guys at Ocean will help me out so's i can move onto the next phase. In a nutshell count me in and when i can confidently post some of my experiances i'll do so Cheers
-
09-07-2007, 09:43 AM #5
If you want to go into this direction, I can provide a private forum area, ftp to who ever you would approve access.
I would require someone to monitor this area and let me know who should have access.
Something to think about.
-
09-07-2007, 12:30 PM #6
- Join Date
- Jun 2007
- Location
- Alberta, Canada
- Posts
- 45
Perfect
Fantastic!
Whoispankaj, I'm not looking for developers to work on MY PROJECT, I'm looking for people to help me start a group project. I believe open source is the way to go with this.
Jim_NZ, I'm actually Canadian, but my parents are both Dutch so I have been using the "handle" Dutchboy since the good old days of DOOM!
Wannabeaflyer, thanks for the support. What is wrong with your 5198 board?
Ok, so what I'm going to do is clean up my code and add some more descriptive comments and then start the open source project on sourceforge.net.
MattO, a private forum for code discussions/troubleshooting would be perfect. If that is possible, then I would be fine with helping to monitor that area. Any other volunteers are of course welcome.
One thing I should mention, is that I'm getting married in one month, so I won't have as much time this month to code as I would normally have, but I will set this up and get it moving so that we can all contribute.
Dutchboy
-
09-07-2007, 12:39 PM #7
- Join Date
- Apr 2007
- Location
- india
- Posts
- 59
Oh yeah...Thats what i meant..An open source motion control software..
Well guys i surely think this is the way..
Pankaj
-
09-07-2007, 12:52 PM #8
-
09-07-2007, 02:43 PM #9
The forum is set up, and I made Dutchboy the Moderator. All this can be changed, You guys set up the rules how you want to operate this forum, I'll leave it up to you.
PM me if you are going to be participant in this project and I'll give you access to the forum.
-
09-07-2007, 03:43 PM #10
Hey Guys,
Under the User Groups Forum Heading, You can hit this thread.
http://mycockpit.org/forums/forumdisplay.php?f=150
If you do not have access, you will need to request access from the Moderator above, via Private message.
Hope this tickles your fancy for an Open Source Motion Forum.
Best regards,
Trev________________________
Trevor Hale
Similar Threads
-
Auto Throttle Control - Phidgets versus Open Cockpits?
By FredK in forum I/O Interfacing Hardware and SoftwareReplies: 0Last Post: 04-21-2010, 12:20 AM -
Motion Software.....help
By neman in forum Cockpit Parts and Motion PlatformsReplies: 10Last Post: 04-14-2010, 12:08 AM -
Flight1 Software (FS Addons) Open Day
By CessnaGuy in forum MyCockpit News and AnnouncementsReplies: 0Last Post: 09-17-2009, 07:57 AM -
Open Source FS2Phidget Project
By CocnutAir in forum FS2Phidget UsersReplies: 11Last Post: 04-28-2008, 07:37 PM -
Motion Software
By IanH1960 in forum Cockpit Parts and Motion PlatformsReplies: 14Last Post: 10-14-2007, 07:59 AM
Candid connections: Platform for casual relationships Live Women Prime Đ¡asual Dating
Super Đ¡asual Dating - Genuine...