Results 1 to 4 of 4
-
02-14-2013, 04:18 AM #1
- Join Date
- Aug 2012
- Location
- SA
- Posts
- 18
analog input help for a POT on OC board
Hi people can you help me wth the Pin-out on the OC stepper Card. I need to find out wich of the
3 pins ( j3-j5 ) are the Common, Input and 5V
Thanks
Marnus
-
02-14-2013, 07:17 AM #2
Re: analog input help for a POT on OC board
Hi Marnus
Look here: USBStepper
and download the manual and you should find the schematic.
Pin 1 = GND
Pin 2 = Signal
Pin 3 = +5V
Here is another great source of information:
Opencockpits USBStepper Motor Card Review
Happy stepping
-
02-14-2013, 10:25 AM #3
- Join Date
- Aug 2012
- Location
- SA
- Posts
- 18
Re: analog input help for a POT on OC board
Thanks perik
MY pot is working fine in sioc monitor ..do you know of any QNH [Altimeter ] scripts for a 10 turn pot, most i see is grey type encoders...
Greetings
Marnus
-
02-15-2013, 10:45 AM #4
Re: analog input help for a POT on OC board
Hi Marnus,
You may find something here: Boeing 767 Simulator Project: dicembre 2010
Edoardo does go in another direction now, but back then he was not very
happy about the OC A/D converter with just 256 levels
Leo Bodnar and FSUIPC are your friends or maybe even better just use an Encoder.
Pretty Womans in your city
Find Sexy Womans from your city...