I have my 737 reverser levers on microswitches. I can't seem to find in fsuipc where i can assign a button press from a joystick to activate the reverser's till released. Any ideas?
Thanks,
Rob
Printable View
I have my 737 reverser levers on microswitches. I can't seem to find in fsuipc where i can assign a button press from a joystick to activate the reverser's till released. Any ideas?
Thanks,
Rob
I believe that you would open FSUIPC using the Modules tab, then select button and switches, and adjust from there, you may have to disable your settings for that key press or joystick assignment in MSFS.
My reverser switch commands "F2" when it makes, enabling reverse and then it commands "F1" when the switch is released, this works good!
Gwyn
I don't know if that method will work for separate reverser controls, but it might. For individual reverser function axis assignment is usually used.
Mine use the F2 assignment trick too. There is only one switch and it's all or nothing.
Correct me if I'm wrong, but as far as I know, there is no way to reverse engines separately at least with FS9.
If there is a way, I would certainly like to know :)
Matt,
FS9 does support seperate engine thrust thru the 'axis' asignment only. 0 to -4039 is reverse.
I could easily program a button to give full reverse thrust thru SIOC but that would require running the wires to another card outside the TQ i have. Trying to keep it neat this time. :)
Sorry, should of been more specific in my comment. I was thinking more in relation to key strokes.