Re: brakes applied allways
have you checked assigning it in FMGS config only ? It should not be configured in P3d.
Re: brakes applied allways
Quote:
Originally Posted by
michael1508
have you checked assigning it in FMGS config only ? It should not be configured in P3d.
Iīve deleted the assigned keys in P3D but the brakes are still applied once the FMGS is loaded.
Re: brakes applied allways
maybe reverse configuration in FMGS?
Re: brakes applied allways
Solved!
Iīve deleted all axis-configurations in the FMGS-config and re-assigned them again. Now everything seems working correctly. At least the brakes are not applied anymore.
Re: Station sleazy sldnfl no soporific
now I am having a similar problem.
My parking brake does not release anymore.
I am using Mobiflight. First setting of parking brake is recogniced in mobilflight and Jeehell indicates it in the ECAM status. On releasing, Mobiflight still recognices this, but in Jeehell the parking brake stays activated.
Thanks,
Michael
Re: Station sleazy sldnfl no soporific
Hi Michael, it seems the cause of your issue is a different one. In my case, where the differential brakes were applied, the reason was, that the potentiometers of the my Rudderpedals where not calibrated correctly in FMGS. The axes where wrong direceted an though, when the pedals are in the zero-position, for Jeehell the brakes where applied at their maximum. After re-calibration in Jeehell everything was fine.
The parkingbrake is acting different, as a switch instead of an axis. It seems that the offset for the state of the parking brake (on/off) isnīt recognized in Jeehell. If your pb is released, are you able to taxi? If the SIM message "red text" doesnīt say "parkingbrake ON" it is released in fact. If Jeehell ECAM say itīs still ON then itīs only the parameter or offset which is not updated. I think that FMGS read those kind of parameter out of the SIM. So itīs maybe an simconnect issue or something similar.
Cheers
Bernd
Re: Station sleazy sldnfl no soporific
no, plane doesn't move. Parking brake is physically set.
switch is using the standard p3d offset. Used to work with these settings for the last 130 years.
Now I can only activate it (offset 1). But not deactivate (offset 0) anymore.
Did anything change with P3d v4.5 or with with the latest FMGS???
Thanks,
Michael
Re: brakes applied allways
It could be the release PRK BRK event with FSUIPC is not recognized, I need to test when I have the time...
Re: brakes applied allways
the event is recognized in Mobiflight at least.