Fuel Handle - APU Fuel used
Hi all,
here is a small tool you can pickup (without forks ;-) ) and use together with pmSystems.
1/
It controls the Fuel consumption of the APU for 737, depending of the Fuel Tank selection for the APU. The APU can use fuel from Center tank or Left main tank.
If left Center pump is ON the APU consum fuel from the Center tank, else the left Main tank is used.
In any case the APU can only consum fuel if NO engine consum fuel from the selected Tank, to don't bother the engines consum.
With the slider you can control the consumption for the Tanks.
2/
You know there is a panel above the Bus-display named "Auxiliary Fuel Transfer" without a function.
Now you can refill the Tanks with this switches, of course it takes a bit time like real !
To refill -->
Both engines Cutoff
Parkbrake set
Extern Power connected and Bus connected
You can refill the Left and Right Main tank seperate or together.
If both Main tanks are filled to 100% and both switches are ON, then the Center Tank become filled. Takes again time.
If you switch to OFF the filling stops.
If you like to define hardware switches for this use e.g.
Left refill Offset 56B3 .4 (Bit 4)
Right refill Offset 56B3 .5 (Bit 5)
To get the EXTERN POWER you need to use also the latest default 737 logic file.
The Program needs a Code (the zip contains also a Code.txt with this code)
---------
RFTRJJOT
---------
Program is now located in http://mycockpit.org/forums/downloads.php?do=cat&id=9
! Important !
Net Framework2.0 is needed, a normal Microsoft Update I think it will be installed on your systems anyway.