@Fil: hardware connect itself does not do anything special at touchdown/liftoff. May a trim thing with hardware?
JL
Printable View
@Fil: hardware connect itself does not do anything special at touchdown/liftoff. May a trim thing with hardware?
JL
it might be....i was thinking in fact at the interaction between skalarki profiler and fmgs...
wrote to marcin to cast a glance here
cheers
fil
Hi JL
Flight planned from LSZH/EDDF, departure on RWY28 via SID "DEGE2W".
Cheers
Greg
Hi JL
Have tried again, first all looked good, see picture, then I changed on the "PROG" page in the MCDU the CRZ altitude and suddenly the wrong drawing on the ND appeared. No idea whether this was related or pure coincidence.
Cheers
Greg
PS: Seems to be coincidence as I have tried once more and showed wrong drawing right immediately.
hi jl,
did u touch the ap/fbw and trim area?
after clean b36 install i have strange trim "fluctuations" during normal manouvering: when hand flying the autotrim inputs are usually huge and keeps going from up to down and the other way around. this makes difficult to find a steady attitude.
this was definitely not happening before
cheers
fil
Thanks, JL, for the new full version. Great job!
I have a question regarding the WideFMGS configuration. When installing B36 the configuration comes up and shows only the ports through port5. Like this:
[widefmgs]
ip=192.168.1.90
port=8003
port2=8004
port3=8005
port4=8006
port5=8107
I didn't do any changes and exited the configuration screen. In the WideFMGS.ini file, however, there was still 'port6' configured. So I deleted 'port6' on all PC's in the WideFMGS.ini files. A test fligth from LSZH RWY 28 to VOR WIL and back to LSZH RWY 16 was successful (it's short, I know ...).
Did I do the right thing? Is 'port6' not needed anymore?
Regards
Adrian
Hi,
@Buentead: the port6 is no longer used, this is just remains of previous versions, you did nothing bad.
@Fil: yes I played a bit with some settings. You may try the 36.1 trial see below (I put less sensitive auto trim there).
@All: I made a test version. This may not work at all, I did not test 100%. It may solve some bugs in network comms, as well as the long lasting skalarki/fscockpit bug.
http://www.jeehell.org/A320FMGS_B36.1.exe
If it does not work for you, please revert to B36 and report your crashes here. This is not meant to be 100% stable...
Regards,
JL
@Gregor: I will look at that next week, I won't have time before then.
regards,
JL
FYI DSR is now released with the official NVIDIA drivers, it has improved FSX/P3D tremendously with smoothing, and sharpness. Jeehell FMGS also looks fantastic!
http://forum.avsim.net/topic/453097-dsr-wow-must-see/