VRS rotory issue for AUTOBRAKE /737
Hi Alan,
I was reading the earlier thread on how you helped out someone who had an issue with his rotory selector for his Wiper -Off-Lo/Hi.
I am also having the same issue trying to work my AUTOBRAKE from RTO/OFF/1/2/MAX.
I tried everything possible and even copied what you had done except list each entry title a bit different and all it does is keep going back and forth.
Grnd is center on the switch and I am using #1 2 3 4 in order on the switch.
I did use an Ohm meter and determined that every turn does make contact and breaks from the last postion.
"0" on the 0/8/8 input is being used for my landing gear handle,
so Im using these inputs...Are these the "Value #'s"??? that are part of the equation? or is it just a number to keep things in order.
OFF=2
ON=1
ON=3
Exactly how I have it now....
(AUTOBRAKE_SWITCH)
Offset=2F80
Length=1
(AUTOBRAKE_SWITCH_RTO)
Offset=2F80
Length=1
FSType=Digital
OffValue=2
OnValue= 1
(AUTOBRAKE_SWITCH_OFF)
Offset=2F80
Length=1
FSType=Digital
OffValue=2
OnValue= 2
(AUTOBRAKE_SWITCH_ONE)
Offset=2F80
Length=1
FSType=Digital
OffValue=2
OnValue= 3
I need 2 more settings for the rest of this control but first I am trying to figure this out :o
Kind regards
James