Printable View
Hi,
Real fast note here. I notice on Autoland that sometimes the plane hits the
runway nose first, bounces up and keeps going as if taking off. What would
cause this. Would wrong elevation press setting be the cause?
Also, on landing the brakes come on, but I have autobrake OFF, and once on
the ground if I either want to taxi, they wont go off and if I were to do a
go a round, they still are showing on.
Any thoughts.
Randy
I also had problems with brakes automatically on at landing though not
configured for that. It turned out that I had an option in MCP.ini enabled. Can't
remember the name now.
Regards Anders Eriksson
http://www.gavle.to/~anders.eriksson/airplane.gif
http://www.gavle.to/~anders.eriksson/sva_logga.gif
Hi,
Make sure you set the right QNH because it that is not correct your plane
will either flare too late or too soon.
Bye,
Marnix
www.dreamflight-cockpit.be
"Randy Eskow" schreef in bericht
news:409553.81791@wb.onvix.com...
> Hi,
>
> Real fast note here. I notice on Autoland that sometimes the plane hits
> the
> runway nose first, bounces up and keeps going as if taking off. What
> would
> cause this. Would wrong elevation press setting be the cause?
>
> Also, on landing the brakes come on, but I have autobrake OFF, and once
on
> the ground if I either want to taxi, they wont go off and if I were to do
> a
> go a round, they still are showing on.
>
> Any thoughts.
>
> Randy
>
What weight, speed and flap setting did that happen with? How far away were
you from Vref?
Ciao
Enrico
"Randy Eskow" wrote in message
news:409553.81791@wb.onvix.com...
> Hi,
>
> Real fast note here. I notice on Autoland that sometimes the plane hits
> the
> runway nose first, bounces up and keeps going as if taking off. What
> would
> cause this. Would wrong elevation press setting be the cause?
>
> Also, on landing the brakes come on, but I have autobrake OFF, and once
on
> the ground if I either want to taxi, they wont go off and if I were to do
> a
> go a round, they still are showing on.
>
> Any thoughts.
>
> Randy
>
Thanks, I will check it out. I had looked at all the ini files, but maybe
missed it.
Randy