CPT PFD/ND and FO PFD/ND with 1 EFIS

hello together,

i have only 1 EFIS (CPT) but want to show on CPT and FO PFD/ND the same... is that possible maybe?

at the moment only CPT ND changes when change the range at EFIS. normally. but i want it change also at FO side.

thanks for your reply!
tom

I do not have an Integrated Standby Instrument System (ISIS). How do I link the barometer on the ISIS to the Captain or First Officer Barometer?


Use the “Aircraft Options” available on the FMGS_Server module. Select ‘yes’ for the Link ISIS baro to CPT EFIS.

https://soarbywire.com/fmgs/

There should also be an option to link CPT to FO EFIS in the Aircraft options.

alternatively, if you are using hardware panels, just configure your i/O Board with the same offsets

hey OmniAtlas,

thanks for your reply.

Quote:

---

Originally Posted by OmniAtlas

There should also be an option to link CPT to FO EFIS in the Aircraft options.

---

I use B50... in the Aircraft options isnt the option "link CPT to FO EFIS".

Only:
- link FO BARO to CPT EFIS
- link ISIS BARO to CPT EFIS

both options are on "yes".

Quote:

---

Originally Posted by gleichi

hey OmniAtlas,

thanks for your reply.



I use B50... in the Aircraft options isnt the option "link CPT to FO EFIS".

Only:
- link FO BARO to CPT EFIS
- link ISIS BARO to CPT EFIS

both options are on "yes".

---

I think you can only link the barometers, you cannot link the ND.


If you want the FO side to show the same as the ND side, just clone the ND and run the application twice (not too sure if you can do this); or run the FO side on a separate computer, but make it run the captain side PFD/ND.

Quote:

---

Originally Posted by OmniAtlas

If you want the FO side to show the same as the ND side, just clone the ND and run the application twice (not too sure if you can do this); or run the FO side on a separate computer, but make it run the captain side PFD/ND.

---

I have tried to start CPT PFD/ND on 1 PC at same time. Didn’t work. But I didn’t create second folder.
i have now installed CPT PFD/ND on separate computer, that works.

Thanks for your help!