What is the good way to manage the PFD / ND / upper EICAS / Lower EICAS in relation with the main's DU panels ( CB & FO ) ?
What PM's offsets could be used and how ?
( My hardware interface is opencockpit / sioc )
Regards
Printable View
What is the good way to manage the PFD / ND / upper EICAS / Lower EICAS in relation with the main's DU panels ( CB & FO ) ?
What PM's offsets could be used and how ?
( My hardware interface is opencockpit / sioc )
Regards
Maybe it is early, however I am not sure I understand your question. Would you be able to clarify this a bit?
In case of malfunction, with the DU panel, we must be able to choice what display we want on what screen. ( ex: if the CB lose the PFD screen, he will transfer the PFD display on the normaly ND screen , because the PFD is the most important display ). I don't know how to do that with PM's offset or function.
Honestly, thats a new one. Maybe Bob can jump in here. I am aware in real aircraft you can move the displays around where you like. In my experience with PM I have never heard of anyone actually doing this.
Good luck though.
Hmmm, I will have to look around in my docs... I think there is a way around this but do not quote me.. I will look.
The display select panel, located on the left and right forward panels, controls the
displays on the inboard, outboard and lower DUs. Normal operation is all selectors
in the NORMAL position. The pilots’ outboard and inboard DUs display primary
flight and navigation data and the upper DU displays primary engine data and fuel
quantity.
If a DU fails, automatic display switching ensures critical information remains
available to the pilots at all times. If the system detects an operational failure on
an outboard DU, the primary flight display automatically moves to the inboard
DU and the failed outboard DU blanks. The OUTBD/INDB selector no longer has
control over that display unit. If the upper DU fails, the engine display
automatically moves to the lower DU.
Manual control of display formats is provided for undetected failures. The
outboard rotary switch on the display select panel controls the formats displayed
on either the outboard or inboard DUs. The inboard rotary switch controls the
display format shown on the lower DU.
No answer ?
Did someone have his DU selection panels active in the cockpit ? ( partially or in totality )
It would be interresting to simulate a DU failure and to be able to switch the DU .
I do not believe that this is a simulated option within PM Software.
It is possible someone from PM can answer this, however I do not believe that there are any key strokes or offsets to control this feature.
Best regards,
Well... There are keystrokes to switch the screens....But I don't know about the sizing. The "F" keys will change the current screen. But if you are doing the PFC and ND on one computer this would not work as it would change both at the same time. drop this question to support2projectmagenta.com and see what they say.
For time now, I use keyboard key sending, not offset (the problem with offset is : all GC change in same time). And for computer running two instance of PM - GC ( I have upper EICAS & Lower EICAS on the same computer, on two screens), I use "Autohotkey", wich is capable of windows activate before key sending. The problem is , by this way there is a delay ( Windows problem ! ) between each order of key sending to different windows. But it works !
To deal with the others PC, I use IOCP ( sioc - opencockpit ), there is a key emulator in the program.
So I can transfer the primary ENG page from the upper EICAS DU to the captain inboard DU, or to the lower EICAS DU ( and upper DU blanks ), to simulate a upper DU failure.
the problem is : "dimming" follow the page, not the DU !