hi all dose any one know if kingbright sc52-11gwa common cathoth displays will work on OP display cards and master card???has eny one have these in there sim???:D
Printable View
hi all dose any one know if kingbright sc52-11gwa common cathoth displays will work on OP display cards and master card???has eny one have these in there sim???:D
According to the user manual I think as long as they are common cathode they should work just fine. here is the link to the manual just click on the downloads next to simple its in there
http://www.opencockpits.com/catalog/...ml?cPath=21_28
Hi,
I use the OP Display-card.
Till now I use them for my MCP and I will use them for the Comms and NAVs too.
With the cards I use of course common cathode 7-segment displays.
I built in the SC36-11YWA with 9mm height.
I would say that the sc52 is to high. Also I cannot say if they work with the master card too.
I´m very sattisfied with this constelation.It works fine.
Wolfgang
I looked at the spec sheet for these and they are electronically compatible with the OC displays card itself, but I didn't check to see if the pin footprint is compatible with the displays digits pcbs, if not you might have to make your own.
BuddyM
Hello,
I used the white sgemnet display from lc-led.com:
http://www.lc-led.com/View/itemNumber/424
you can have a look at there specs.
I use them on the 7-segment display pcb's from OC, and they work!