Hi guys,
I am totaly confused with the flap settings. I have followed all the instructions but Its not happening for me. Below is the flaps section from the Posky 767 300 I am using. There is two flap sections. Which do I referance to set the aircraft file in the cdu?
[Flaps.0]
type= 1
span-outboard= 0.800
extending-time= 30.000
system_type= 1
damaging-speed= 200.000
blowout-speed= 250.000
lift_scalar= 0.540
drag_scalar= 0.540
pitch_scalar= 0.500
flaps-position.0= 0.000, 0.000
flaps-position.1= 1.000, 0.000
flaps-position.2= 5.000, 0.000
flaps-position.3= 15.000, 0.000
flaps-position.4= 20.000, 0.000
flaps-position.5= 25.000, 0.000
flaps-position.6= 30.000, 0.000
[Flaps.1]
type= 2
span-outboard= 0.800
extending-time= 30.000
system_type= 1
damaging-speed= 250.000
blowout-speed= 300.000
lift_scalar= 0.540
drag_scalar= 0.540
pitch_scalar= 0.500
flaps-position.0= 0.000, 0.000
flaps-position.1= 5.000, 0.000
flaps-position.2= 5.000, 0.000
flaps-position.3= 5.000, 0.000
flaps-position.4= 5.000, 0.000
flaps-position.5= 20.000, 0.000
flaps-position.6= 20.000, 0.000
Here is the type file from the CDU
AircraftType = B767300
N1ref=102.5
TOGApitch= 17.5
NetWeight=200000
Payload=88000
Fuelmax = 171394
Engines=RR211-524G/H
Efis=On
flppos=0
flpset=0
vmin=214
vret=0
vext=234
vmax=360
flppos=1
flpset=1
vmin=177
vret=234
vext=191
vmax=250
flppos=5
flpset=5
vmin=163
vret=191
vext=182
vmax=230
flppos=15
flpset=15
vmin=159
vret=182
vext=175
vmax=210
flppos=20
flpset=20
vmin=155
vret=175
vext=151
vmax=210
flppos=25
flpset=25
vmin=140
vret=161
vext=149
vmax=180
flppos=40
flpset=30
vmin=138
vret=156
vext=0
vmax=170
flpadd1=332000
flpkts1=+20
flpadd2=380000
flpkts2=+35
I have used the monitor function in the CDU and that is giving some strange results.
James
