Re: Wiring USBoutput card
Re: Wiring USBoutput card
ThX david,
I have that info. But it says something about a common 5+ volt. And I used phidgets before were you have only a USB connection and the power supply ( my case 5+ V) for the leds.
Any way thx.
henri
Re: Wiring USBoutput card
Hi Henri
I have done it another way, you can see it in the iFly2FSUIPC tutorial on this page:
http://www.737sim.dk/page6.html
Regards
Claus
Re: Wiring USBoutput card
THX a lot,
and a very very nice site. it was help full.
regards,
Henri
Re: Wiring USBoutput card
Quote:
Originally Posted by
henri
But it says something about a common 5+ volt. And I used phidgets before were you have only a USB connection and the power supply ( my case 5+ V) for the leds.
That is nothing to do with how you apply power - the diagram is correct. Nico is just warning everyone that the Mastercards have a common - (ground) whereas the USB output card has a common + (positive) ie the leds need to be connected with their negative lead to the 64 individual screw connectors on the card (the opposite to the mastercard outputs!!!)
David
Re: Wiring USBoutput card
Hi David,
I know that, because i also use phidgets cards. I was just having doubts about where to apply power J9 or J9 and J8. I thought i needed to apply power to the card(J9) and separately apply power for the LEDs(J8). Thats all
Thnx and regards,
henri