Problem with engine startup

Below I have posted the beginning of my aircraft.txt file in the CDU/Types folder.

I am using FS2004, GC 487, CDU 487, RCDU 487, MCP 487, Systems 180 and Instructor 133.

I have huge problems to get a smooth engine startup, neither with the standard figures for "startup delay" a.s.o. nor with some tweaked figures.

Opening the overhead start switch N1 raises and after a short time N2 raises as well up to 12 to 13% and then drops back if I'm not opening the fuel cutoff lever in time. Normally N2 should raise up to 25% before you are allowed to open the cutoff lever, as I have been told by a real pilot.

Does anyone have a working config file for a 737-800?
I am interested, which figures you have for a smotth engine start!

Quote:

---

;Configuration file for Project Magenta Software
;Created by Steve Reyling
;Updated 25 May, 2006
;
;Version 4
;
;737-800 with CFM56-7B26 Engines

TOGAPitch=15
N1ref = 97.3
Flare = 30
RadioAlt = 18
NetWeight= 91300 ;Empty Weight
Payload = 27400 ;Get values from Aircraft.cfg file
Fuelmax = 46063
FFFactor= 1
FuelFactor=1
FFMax= 11
AircraftType = B737-800
Engines=CFM56-7B26
EnginesRate=26.3k

N1Init=3.2
N1StartupDelay=15
N1Stable=23.4

N2StartupDelay=20
N2Crank=32.3
N2ContinueDelay=10
N2Stable=55.5
N2ShutDownDelay=20

EGTStartupDelay=12
EGTStable=494
EGTShutDownDelay=20

IgnoreEngineStartParam=Off
NoEngineValueBuffering=Off
NoEngineBuffering=Off

---

Thanks for any help in advance!