Printable View
Finally here!
http://s24.postimg.org/5wq2twd2t/IMG_1619.jpg
I sold my BenQ W1080ST because I didn't want the hassle with mounting. I also wanted the projector for 'cinema night', or movie night -- with the diminutive size, it is possible to move and setup in minutes.
http://s24.postimg.org/ysqntmq7p/IMG_1623.jpg
http://s24.postimg.org/gfq2j2fqt/IMG_1624.jpg
http://s24.postimg.org/9f22qadyt/IMG_1625.jpg
http://s24.postimg.org/omi2an5th/IMG_1627.jpg
http://s24.postimg.org/w6b5coz05/IMG_1628.jpg
Thats amazing, Ben! Thanks for sharing. Are you planning to use two of them creating a 180° (or more) visual?
Regards,
Stephan
Perhaps in the future Stephen, it's happily sitting in the TV room now :)
It is great Ben, very good investment :D looking forward for your videos with that new toy :cool:
Congratulation !
Some further experiments -- 180 wrap around with one projector?
https://www.youtube.com/watch?v=Sj-TeXmB5nE
Hello, I've decided to experiment with Immersive designer pro.
Space restrictions so I decided to try a wrap around screen (180 degrees) with a radius of 1.2 m.
The screen will tightly wrap around the MIP.
Plugging in values for the projector into Immersive designer pro (1920x1080p projector, 0.29 throw ratio, etc), and rotating 2 of the projectors, I get the following (attached). I think the only thing that will need adjusting is the Y offset (it throws above the projector)
Note, it looks like I will have mount it to ceiling if you want to get a true 180 degrees with 2 projectors! Perhaps with three you can just leave it on the floor.
More experimenting and brainstorming to be done.
Appended --
Placed the projector 120 cm from the wall and the image is about 70 cm Y offset. Obviously the closer the projector is to the wall, the smaller the Y offset. There will need to be trade off between how far you want the projector to be from the screen and the vertical offset.
http://www.mycockpit.org/forums/atta...id=11297&stc=1
Hi Ben,
Did you finally manage to use the PF1000U on a curved screen display?
Thanks!
Luis
Hi Luis, I've switched over to a Optoma GT1080Darbee.
I believe Christian from Vier Im Pott uses short throw projector and he has implemented it successfully.
Thanks for the quick reply Ben! I'll get in touch with Christian.
Thanks!