Newbie looking for help with Potentiometer setup
Hi all
I brought 4 Vishay Spectrol 357 Potentiometers to use on my helicopter simpit.
Alot smaller than I thought they would be given they are ideal for heavy use.
My question is methods on how to hook them up. The shaft on the pot is Circular so I am not too sure how to go about attaching gears etc on the pots
Regards
Rhys
Re: Newbie looking for help with Potentiometer setup
You can use a setting screw to hold the gear in place or use the threads on the pot and a nut to hold things too. That is my experience, may not be the right way though!:oops:
Re: Newbie looking for help with Potentiometer setup
Thanks Grant, Its odd that the shaft is circular, as most pots I have seen have a flat side.
On another note I have been looking at hall effect sensors, as I understand it you can do away with gears etc.
Do you need to have a magnet to get a hall effect sensor to work or can you place the sensor close enough to a metal rod to get it working.
Reason I ask is my cyclic is connected to two horizontal rods that have a total movement of about 10cm.
The pedals are the same set up with about 12cm horizontal movement.
Anyone with any thoughts on hall effect sensors or using them ?
Cheers
Rhys