Please do not post inaccurate drawings :)
You're efforts a very much appreciated, but, there is a vast difference between the A320 or A319 and the A330 and A340. The individual components are the same but the overhead is much wider and longer. Where as the breakers are not on the A320 Overhead, they ARE on the A330 and A340. Much more differences.
I hate to see a builder get frustrated only to find out they've got it all wrong.
Here's Phil744 with my A340 overhead (not completed yet) at FSWeekend. you can see the difference between the A320 and A340. The layout is similar though.
http://mycockpit.org/photos/FSweeken...thOverhead.jpg
When I started my project, I depended on drawings others made and even started to build my base structure only to find out (three times) it was wrong. Unless you're taking measurments from a real cockpit, please do not post drawings that are not accurate.
Thanks again, and I wish you all the luck on your project.
Matt Olieman
Quote:
Originally Posted by
kikigey89
Sure!
We already planned to publish them here, but before, I have to update and check them so that there is no mistake in them.
First homepage for dimensioning was
http://www.avsim.com/hangar/flight/a...ject/main.html. By a fluke, I found pictures on the internet, where someone is measuring an A320 cockpit. From this we got the missing dimensions. We compared them and found out, that they are almost similar. This was a great help for us, because the only difference of dimensions between an A320 and A330 cockpit is the length of the pedestal... which we did not recognized... :roll: So the rear part of our pedestal is around 10 centimeters too short, but we will fix it, if we get the missing value.
Another small difference is the shape of the main panel. The left and right section (loudspeaker panel, etc.) are a little bit different, we had to interpolate the dimensions.
I will upload our drawings in the next few days! :)