Full screen CDU

Need help not to goof.
Just got my CDU. Pluged USB and S video.
Now I have to go from the virtual CDU on the computer screen to the real hardware, ie moving CDU display only on the little screen.
Any step by step instructions?
Thanks.

Push menu twice, and go to screen menu. Thats the place to get full screen with no frame, and the place you strech and adjust where you want the letterings to be positioned on the screen.

But you could always enter this manually in the cdu.ini file.

Here is what my look like now

Project Magenta CDU]
Build#396
[Display]
Title=Off
/ Enables/Disables Title Bar.
WindowName=Project Magenta CDU - Build 396
/ You can set the name in the Title
/ Bar here.
Topmost=On
/ Will set the CDU program on top
/ of any other window.
FSWindow=Off
FSFocus=Off
/ Will try to be inside the FS window
/ and give back the focus to FS after
/ a key has been pressed
Minimize=Off
/ Will minimize after initialization
[Network]
DisableAutoNetDir=Off
/ Automatically creates the netdir
/ entry when enabled
NetDir=\\cdu1\netdir\
/ Sets the folder which shares data
/ with the other programs
SBPPath=
/ Fath to the folder in which Squawkbox
/ flightplans are saved
[Flight]
LimitMCPSpeed=Off
AutoFlapRetract=Off
AutoFlapExtract=Off
/ MCP Speed limits set by MCDU, flap
/ retraction auto or manual
[User]
LastBuild= 396
/ Last version of the software run
/ on this PC
DeleteCFPFiles=Off
/ Automatically deletes binary CDU
/ Flight Plan Files (.CFP files)
/ when flight plans flushed and program
/ exits.
EngravityComm= 0
/ Serial communication to Engravity
/ CDU hardware
ElanComm= 0
/ Serial communication to CDU hardware
/ Logs flight path calculation.
Font=pmbcdu
FontNoSerif=Off
FontBold=Off
FontFactor= 1
/ Font display parameters
Text=white
BackgroundBlue=Off
/ To set blue background in full
/ text mode
PreFlight=Off
/ Can be set to Off/On/Full which
/ results in different handling of
/ the CDU setup process. E.g speeds
/ and weights are set automatically
/ when this is off.
NoSelPrompt=Off
/ Disables RWY and CO RTE SEL prompts
NoAwyPrompt=Off
/ Disables option to offer airway
/ proposals for route page entries
Flush=On
/ Flushes data from the CDU on startup.
FlushOnLand=On
/ Flushes data from the CDU when
/ speed is below 60 knots
DescendNowNM= 50
/ Distance from T/D at which DESCEND
/ NOW is anunciated on the DES page
/ (lower alt selected, VNAV)
Messages=On
/ Displays current messages in the
/ Scratchpad.
NoCOMXPDR=Off
/ Disables COM/XPDR display in the
/ NAV RAD page
KeyboardLights=On
KeyboardLightsXP=On
/ Lights keyboard lights when EXEC,
/ MESS, FAIL light up
AutoKeyLayout=On
KeyLayout=N1
/ Setting from MENU/DISPLAY where
/ the type of keyboard layout is
/ controlled
PageUpdate= .8
/ Sets the update frequency of the
/ remote CDU screen
RemotePageUpdate= 1
AutoILSLOC=Off
/ Sets LOC CRS automatically
ShowFrqinRoute=On
/ Displays frequency of VORs/NDBs
/ on the LEGS page
CLBThrOAT=Off
/ Uses OAT instead of TAT for the
/ climb thrust calculation
PlanStep=Off
/ Handles the scrolling of the LEGS
/ page differently in PLAN mode
AutoGear=Off
/ Auto Gear for Standalone version
DisableDoubleClick=Off
/ disables minimizing upon mouse
/ double click
NoFSGWT=Off
/ Does not display FS gross weight
/ in the PERF INIT page [in brackets]
Case=Gray
Log=Off
/ Logs flight path calculation/ CDU
/ procedures
StrobeLights=Off
StrobeBacklight=Off
/ Shift Register Light Handling Customizaition
[OpenGL]
/ This section is for OpenGL settings
/ and OpenGL Full Screen Display
UseOpenGL=On
/ Will use OpenGL rather than normal
/ windows text, 24 columns, 14 rows
FontSmoothViaPolygons=Off
/ When set to on, font smoothing
/ for display is done via polygons,
/ if off, via blended outlines
UseOpenGLFull=On
/ Bitmap-less full screen operation
SetOpenGLFull=On
/ Will automatically Maximize screen
/ for full screen operation
OpenGLFullX=-7
OpenGLFullY= 30
OpenGLFullZ= 0
OpenGLFullWidth= 0
OpenGLFullHeight= 1
OpenGLFullFontSize= 0
OpenGLFullSpacing= 30
OpenGLFullScratchPad=-20
OpenGLFullTitleText=-6
OpenGLFullRotate= 0
[Max]
Full=Off
/ Full screen text activation and
/ parameters
/ To set, use MENU key (twice), DISPLAY,
/ FULL SCREEN pages
FullTopmost=Off
FullNoFrame=Off
InvertFull=Off
ScreenTop= 0
ScreenLeft= 0
ScreenHeight= 5175
ScreenWidth= 9600
TextTop= 353
TextLeft= 475
TextWidth= 6933
TextOffset= 980
[COMMAND Keyboard Codes]
//these are used *in addition* to the Ctrl-F1-F12 etc. commands
//for INIT/REF RTE ETC

ok here goes (even though it is for a competitors cdu ;-) )

in the CDU.ini look for the entry Full=

This should be on: full=on

you will get a second cdu display thats dragable and resizable on the lcd of the cdu using your computers video out.

I asume your video out on your computer is allready working ?
In your computers video properties you can see where this video out screen is positioned (left, right, above or under your main vga display). just set the correct resolution (use overscan if you can) and drag the new window you now have in PM there.

Again, i presume you use PM. Hope this helps...if not just yell.

Hope im not wrong....its been a long time since i had to follow this procedure.

Stef

Or do it from the menu as Ivar suggested :-) we were typing at the same time ;-)

Thanks guys....( Stef...we just compete for the best fun in town, is'nt it ...)

Pretty shure its going to work but the first time is always .....Blah blah blah
Let U know if I have probs. Thanks again
Jack