-
DIFFERENTIAL BRAKES
Hi,
I am having problems with brakes.
There is a message constantly when I am on the ground that the Differential brakes are ON.
I have a CH rudder pedal hooked up. The setting is done through Control settings in FSX, and not FSUIPC. It is not reversed.
Can anyone tell me why this is happening?
Thanks,
Taufeeq
-
Re: DIFFERENTIAL BRAKES
Try changing the sensitivity and null zones of the brake axis. I have had the same problem before and if I remember correctly setting a small null zone will get rid of the problem. Let us know if that doesn't work.
-
Re: DIFFERENTIAL BRAKES
Have you tried reversing it?
Darren
-
Re: DIFFERENTIAL BRAKES
Good point Darren, I assumed because he said it wasn't reversed that it was tried the other way, probably best to not assume.
-
Re: DIFFERENTIAL BRAKES
Hi darren and Shawn,
Thanks guys for such a fast reply.
Yes, that may be an issue. I did have the null zone set at almost 25%, and the sensitivity is low as well.
No, I do not have it reversed.
I will try setting it without any null zone and at 75% sensitivity, see what happens.
Will post my results once I do that.
Thanks,
Taufeeq.
-
Re: DIFFERENTIAL BRAKES
I have to have 'reverse' selected for my CH pedals brakes to work - nothing to do with dead zones and sensitivity.
Regards,
Darren
-
Re: DIFFERENTIAL BRAKES
I tried with the null zone and sensitivity, did not work. I will try reversing it and see how it goes.
Thanks again.
Taufeeq
-
Re: DIFFERENTIAL BRAKES
Hi Guys,
Sorry to come back to this issue again.
I tried reversing the brakes, and it works for the Brakes message, but Differential brakes message still keeps showing, and I have problem when taxiing on the LD767.
I have to put the power at 75% to even move the plane.
Any other ideas I can try?
thanks.
Taufeeq
-
Re: DIFFERENTIAL BRAKES
The only thing I could suggest is to check all you axis settings and make sure you don't have another axis assigned to the left or right brake? Maybe try reducing the sensitivity a bit more, keeping the mull zone to zero. I take it this happens with all aircraft and not just the LD767?