Strange behavior with 4 I/O Cards on one USB-Card
Hi all,
i have 4 mastercards connected to one USB-expansion card. All inputs/ outputs works well. But the mastercard number 4 does not detect the last 20 inputs from mastercard 4 correct.
Its hard to describe, but i will try it.
In the testsoftware (contolladeur) i can see the switches and its changes without problems. But within SIOC i cant get these 20 Inputs working. No matter what funktion and what offset i link to these inputs, they doesn't work. The ipconsole shows no reaction as well.
The programing should not be the problem, because i take a working offset (thats work well on another input) and just link it to one of the 20 Inputs. From now it doesn't work.
I already changed the mastercard, expansioncard without any succsess.
I use SIOC 3.4.
Any ideas where i can search? is there a known bug within sioc?
Regards
Thomas
Re: Strange behavior with 4 I/O Cards on one USB-Card
has nobody an idea?
Regards
Thomas
Re: Strange behavior with 4 I/O Cards on one USB-Card
Thomas
I assume that Controlador is showing the correct input switch numbers for mastercard no 4 ie in the range 216 - 287? If so, have you tried using SIOC 3.7 to see if it makes any difference? Sorry, but that is all I can think of
David
Re: Strange behavior with 4 I/O Cards on one USB-Card
Rember in the "C:\Programmer\IOCards" to change the file called iocard :
[ Numero de tarjetas Master inter-conectadas ]
[ Number of connected master cards ]
NCards=1
Try to change it to 4