Printable View
Hello,
I am a manufacturer of cockpit and my project is well advanced (see www.737project.com).
I have a FMS and MCP GC project magenta.
Can you help me, because I can not create a new plan on my fms ?
Which tool do you use ?
Is it possible to give a departure airport and destination airport and to automatically calculate the route ?
Thank you for your help.
You can create a flight plan using the FMS/CDU and then save it for later. However, I am not aware of automatic routing within PM's CDU. You will have to input all the waypoints/fixes yourself. You can also load any saved FS flight plan. The following is from Project Magenta's manual:
It can also automatically read any FS Flight Plan once it has been saved. The last saved flight plan will then be displayed in the ND. For this, you have to share your FS Flight Plan folder (normally under My Computer / XXX's Documents / Flight Simulator) for read/write access as FSPLANS and it will be recognized. To load them into the CDU, press the RTE key twice and select FS Flight Plan
ws,
PM FMS software will not create a plan - you need to import one from MSFS or other planning software.
I am not at home, so dont have access, but look at the documentation on projectmagenta.com, or look at the import current plan page - create a flight plan in MSFS and save it, then make it your current plan. PM will then import the finished plan to FMS from the flight plan page.
You can then modify the plan - also try searching here for FMS flight plans.\\
Hello,
Thank you for your help. I just tried and it works very well with FSnav.
I take the mail to another help.
At the time of T/D I've always the message "Drag required" the plane does not follow the speed specified in the plan.
For example here, the waypoint PITOM speeds of 238, the FMS is 315 and the airplane is in overspeed.
Do you know why?
What aircraft model are you using?
Does the auto throttle have the throttles closed?
I use on FS the PM 737 700 (PMDG) and for the FMS I using the B737-700 engines CFM56-7B20 PM.
No, i'm not sure but for auto-throlle is not completely closed.
I dont understand why the FMS does not follow the instruction of my route ?
I put my ini file from FMS. Maybe this will help?
Thanks ans sorry for my bad english.. :?
[Project Magenta CDU]
Build#406
[Display]
Title=On
/ Enables/Disables Title Bar.
WindowName=Project Magenta CDU - Build 406
/ You can set the name in the Title
/ Bar here.
Topmost=Off
/ Will set the CDU program on top
/ of any other window.
FSWindow=Off
FSFocus=Off
/ Will try to be inside the FS window
/ and give back the focus to FS after
/ a key has been pressed
Minimize=Off
/ Will minimize after initialization
[Network]
DisableAutoNetDir=Off
/ Automatically creates the netdir
/ entry when enabled
NetDir=\\INTERNET\netdir\
/ Sets the folder which shares data
/ with the other programs
SBPPath=
/ Fath to the folder in which Squawkbox
/ flightplans are saved
[Flight]
LimitMCPSpeed=Off
AutoFlapRetract=Off
AutoFlapExtract=Off
/ MCP Speed limits set by MCDU, flap
/ retraction auto or manual
[User]
LastBuild= 406
/ Last version of the software run
/ on this PC
DeleteCFPFiles=Off
/ Automatically deletes binary CDU
/ Flight Plan Files (.CFP files)
/ when flight plans flushed and program
/ exits.
EngravityComm= 0
/ Serial communication to Engravity
/ CDU hardware
SFSComm=Off
/ Simflight Studio Communication
/ handling
UDPComm=Off
/ UDP communication to FMC hardware,
/ do not set it to on if you do not
/ have any such hardware connected
ElanComm= 0
/ Serial communication to CDU hardware
/ Logs flight path calculation.
Font=pmbcdu
FontNoSerif=Off
FontBold=On
FontFactor= 1
/ Font display parameters
Text=colour
BackgroundBlue=Off
/ To set blue background in full
/ text mode
PreFlight=Full
/ Can be set to Off/On/Full which
/ results in different handling of
/ the CDU setup process. E.g speeds
/ and weights are set automatically
/ when this is off.
NoSelPrompt=Off
/ Disables RWY and CO RTE SEL prompts
NoAwyPrompt=Off
/ Disables option to offer airway
/ proposals for route page entries
Flush=On
/ Flushes data from the CDU on startup.
FlushOnLand=On
/ Flushes data from the CDU when
/ speed is below 60 knots
DescendNowNM= 50
/ Distance from T/D at which DESCEND
/ NOW is anunciated on the DES page
/ (lower alt selected, VNAV)
Messages=On
/ Displays current messages in the
/ Scratchpad.
NoCOMXPDR=Off
/ Disables COM/XPDR display in the
/ NAV RAD page
KeyboardLights=Off
KeyboardLightsXP=Off
/ Lights keyboard lights when EXEC,
/ MESS, FAIL light up
AutoKeyLayout=On
KeyLayout=N1
/ Setting from MENU/DISPLAY where
/ the type of keyboard layout is
/ controlled
PageUpdate= .8
/ Sets the update frequency of the
/ remote CDU screen
RemotePageUpdate= 1
AutoILSLOC=On
/ Sets LOC CRS automatically
ShowFrqinRoute=On
/ Displays frequency of VORs/NDBs
/ on the LEGS page
CLBThrOAT=Off
/ Uses OAT instead of TAT for the
/ climb thrust calculation
PlanStep=On
/ Handles the scrolling of the LEGS
/ page differently in PLAN mode
AutoGear=Off
/ Auto Gear for Standalone version
DisableDoubleClick=Off
/ disables minimizing upon mouse
/ double click
NoFSGWT=Off
/ Does not display FS gross weight
/ in the PERF INIT page [in brackets]
Case=Gray
Log=On
/ Logs flight path calculation/ CDU
/ procedures
StrobeLights=Off
StrobeBacklight=Off
/ Shift Register Light Handling Customizaition
[OpenGL]
/ This section is for OpenGL settings
/ and OpenGL Full Screen Display
UseOpenGL=On
/ Will use OpenGL rather than normal
/ windows text, 24 columns, 14 rows
FontSmoothViaPolygons=Off
/ When set to on, font smoothing
/ for display is done via polygons,
/ if off, via blended outlines
UseOpenGLFull=Off
/ Bitmap-less full screen operation
SetOpenGLFull=Off
/ Will automatically Maximize screen
/ for full screen operation
OpenGLFullX= 0
OpenGLFullY= 0
OpenGLFullZ= 0
OpenGLFullWidth= 0
OpenGLFullHeight= 0
OpenGLFullFontSize= 0
OpenGLFullSpacing= 0
OpenGLFullScratchPad= 0
OpenGLFullTitleText= 0
OpenGLFullRotate= 0
[Max]
Full=Off
/ Full screen text activation and
/ parameters
/ To set, use MENU key (twice), DISPLAY,
/ FULL SCREEN pages
FullTopmost=Off
FullNoFrame=Off
InvertFull=Off
ScreenTop=-1440
ScreenLeft=-10800
ScreenHeight= 5175
ScreenWidth= 9600
TextTop= 1112
TextLeft= 470
TextWidth= 6910
TextOffset= 980
Have you deleted the panels/gauges from the PMDG 737 panel.cfg? If you are using Project Magenta, you do not want anything in the panel.cfg except the forward view. Otherwise, the PMDG 737 might be trying to control the aircraft as well as PM's MCP.
I'll try it tomorrow.
I want you informed.
Thank you.
Hello,
Thank you for your help. It seems that this problem is solved, but I always have problems that the FMS should follow the speed in the plan. I will open a new topic.
Thank you for your help.
WS,
I remember a similar problem with the "Drag Required" messsage - email support@projectmagenta.com with the symptoms.
I think it is to do with a setting in the ini file, or set up on the FMS menu page.